Abstract:The effect of cold-drawing on the tensile property and giant magneto-impedance (GMI) effect of melt-extracted Co-based amorphous microwires was evaluated through detailed analyses of the distribution of residual stress and microstructural evolution. The tensile ductility and tensile strength increased gradually with cross-sectional area reduction ratio (R) until 51%, and decreased with further deformation. The microwire with R=51% exhibits the highest tensile ductility of 1.09% and tensile strength of 4320MPa. Structural and thermodynamic analyses reveal that it is the mechanical deformation rather than thermal activation that induces the precipitation of nanocrystals and arrests the quick extension of shear bands leading to the enhanced ductility. Interestingly, the GMI effect also attains the maximum value of 160% at 10MHz when R=51% (30% larger than that of the as-cast wires), before decreasing with further cold-drawing. Such an identical evolution trend of both tensile and GMI properties can be ascribed to two underlying mechanisms: the generation of longitudinal and circumferential residual stresses and the growth of deformation-induced nanocrystals during cold-drawing. The role of residual stress is established herein not only as a trigger to accelerate the amorphous-to-nanocrystalline phase transformation but also as a decisive contributor to the mechanical and GMI performance. The unique simultaneous improvement of both mechanical and GMI properties of cold-drawn Co-based microwires opens up new possibilities for a variety of engineering applications, such as high-performance magnetic, stress and biological sensors.

Coupled effect of specimen size and grain size on the stress relaxation of micron-sized copper wires

Atomistic Numerical Investigation of Single-crystal Copper Nanowire with Surface Defects

Surface Stress Effects On The Yield Strength In Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

Size Effect in Stainless Steel Thin Wires under Tension

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Large GMI effect in Co-rich amorphous wire by tensile stress

Effect of size, temperature and strain rate on dislocation density and deformation mechanisms in Cu nanowires

True Origin of the Size Effect in Cold-Welded Metallic Nanocrystals

Stress Relaxation and Grain Growth Behaviors of (111)-Preferred Nanotwinned Copper during Annealing

EFFECTS OF SPECIMEN SIZE AND APLLIED STRAIN RATE ON THE PLASTIC FLOW OF FCC METALS

Effect of Microstructure and Microtexture on the Mechanical Properties of Small-Strain Cold-Drawn Pearlite Steel Wires

Effects of stacking fault energy on deformation induced grain boundary relaxation in nanograined Cu alloys

Coupled effect of size, strain rate, and temperature on the shape memory of a pentagonal Cu nanowire

Effect of stress relaxation on soft magnetic properties of Fe76Si9B10P5 metallic glass

Size Effect in Pd77.5cu6si16.5 Metallic Glass Micro-Wires: More Scattered Strength with Decreasing Diameter

Grain size effects on the compressibility and yield strength of copper

Effects of Grain Size and Shape on Mechanical Properties of Nanocrystalline Copper Investigated by Molecular Dynamics

Atomistic Mechanism of Stress-Induced Combined Slip and Diffusion in Sub-5 Nanometer-Sized Ag Nanowires.

Size-dependent deformation mechanisms in copper gradient nano-grained structure: A molecular dynamics simulation

Approaching the theoretical elastic strain limit in copper nanowires.