Abstract:The effectiveness of Carbon Fiber Reinforced Polymer (CFRP) seismic-retrofit of circular Reinforced Concrete (RC) bridge piers under vehicular lateral impact loading is addressed in the present work performing experimental tests. Sixteen 1/3 scale RC bridge piers with circular cross-sections characterized by three different configurations of longitudinal and transverse reinforcements were tested with and without CFRP seismic-retrofit. In the first case, tested columns represent common shear-deficient RC bridge piers designed with obsolete design practice or for non-seismic areas. In the second case, CFRP wrapping is applied according to common seismicretrofit practices to increase the shear capacity and ductility of columns. Experimental tests were carried out under static and lateral impact loading with propped cantilever conditions reproducing a typical short-span viaduct bridge pier configuration. In the static tests, the lateral load was applied monotonically through a hydraulic jacket under equivalent impact conditions. In impact tests, the lateral impact load was applied through a colliding truck equipped with a rigid hammer at the typical vehicular impact location adopting two different impact velocities (3 and 4.5 m/s). A critical investigation of the transient dynamic characteristics, damage evolution, and post-impact damage is conducted by comparing the results obtained with and without CFRP seismic-retrofit, and under static and dynamic loading conditions. It is shown that CFRP seismic-retrofitting of circular RC bridge pier can also be effective in reducing the vulnerability under lateral impact loading. The CFRP-retrofit approach adopted in this study meets the requirement of multi-hazard prevention improving the robustness of the bridge. Finally, a semi-empirical equation for predicting the maximum displacement under impact loading is derived based on experimental results. The proposed equation adopts the results of a static test as a proxy for assessing the dynamic behavior allowing for the design of the required shear and flexural load-carrying capacity.

Seismic Performance Assessment of a RC Bridge Retrofitted with SCEBs Under Near-Fault Pulse-Like Ground Motions

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Seismic resilience of RC bridge with self-centering energy dissipation braces using SMA U-shaped plates

Seismic performance of RC bridges with double-column medium height bents retrofitted with SCEBs under near-field ground motions

Seismic Fragility Assessment of an Existing Multi-Span RC Bridge Equipped with Risk Mitigation Systems

Performance-Based Seismic Design for Bridge Bents Retrofitted with BRBs Using the Ductility Demand Spectra of SDOF Oscillators with Bilinear Fuses

Seismic performance assessment and retrofitted by buckling-restrained braces for half-through concrete-filled steel tubular arch bridge with the vertical suspended deck system

Seismic response characteristics and performance improvement of near-fault continuous rigid-frame bridges

Enhancing Bridge Performance Following Earthquakes Using Markov Decision Process

Seismic Response of Resilient Bridges with SMA-Based Rocking ECC-Reinforced Piers

Probabilistic Seismic Performance Assessment of RC Frames Retrofitted with External SC-PBSPC BRBF Sub-structures

Seismic performance improvement of continuous rigid-frame bridges with hybrid control system under near-fault ground motions

Shake table tests and numerical studies on buckling-restrained braces as a seismic resilient measure for reinforced concrete twin-column tall bents

Application of BRB to Seismic Mitigation of Steel Truss Arch Bridge Subjected to Near-Fault Ground Motions

A hybrid buckling-restrained brace for enhancing the seismic performance of steel moment resisting frames

Performance-Based Seismic Design of Hybrid Isolation Systems with Gap-Tunable BRBs for Bearing-Supported Bridges

Utilizing a new self-centering hysteresis model to assess the seismic vulnerability of a long-span cable-stayed bridge equipped with SMA wire-based roller bearings

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Development and application of replaceable self-centering energy dissipative braces

Seismic responses and resilience of novel SMA-based self-centring eccentrically braced frames under near-fault ground motions

Probabilistic Seismic Vulnerability and Loss Assessment of a Seismic Resistance Bridge System with Post-Tensioning Precast Segmental Ultra-High Performance Concrete Bridge Columns