Abstract:Shape memory alloys (SMAs) have found several applications in earthquake‐resilient structures. However, because of high material costs, their implementation on industry projects is still limited. Developing design approaches that minimize the use of expensive SMAs is critical to facilitating their widespread adoption in real structures. This paper proposes a performance‐based seismic design optimization procedure for self‐centering steel moment‐resisting frames (SC‐MRFs) with SMA‐bolted endplate connections. The topology optimization uses a metaheuristic algorithm to minimize the frame's total cost, including the initial construction and expected repair costs. The design variables are the steel beam and column sections, SMA connection properties, and the topology of the SMA connections. Different constraints are considered, such as the constructability of the chosen steel sections, member strengths, performance‐based design, Park‐Ang damage index, and strong‐column weak‐beam requirements. Furthermore, the seismic safety of optimal designs is assessed by calculating adjusted collapse margin ratios according to FEMA‐P695. An illustrative optimization study using three‐ and nine‐story SC‐MRFs is presented. The optimal SC‐MRFs are then assessed in terms of cost and seismic performance. The results confirm the effectiveness of the proposed optimum design, which minimizes the use of SMAs while ensuring improved seismic performance. The case studies show that the optimal placement of SMA connections can reduce the total cost by up to 71% and 61% for the three‐ and nine‐story SC‐MRFs, respectively, compared to nonoptimal frames. Moreover, the optimal SC‐MRFs exhibit more uniform drift distributions, lower residual story drifts by up to 96%, and increase collapse capacity by up to 102%.

Seismic responses and resilience of novel SMA-based self-centring eccentrically braced frames under near-fault ground motions

Self-centering Eccentrically Braced Frames Using Shape Memory Alloy Bolts and Post-Tensioned Tendons

Development of novel SMA-based D-type self-centering eccentrically braced frames

Performance-Based Seismic Design and Evaluation of Fused Steel Diagrid Frame

Seismic behaviour of self-centring hybrid steel frames equipped with SMA plates under mainshock–aftershock sequences

Near-fault ground motion effect on self-centering modular bracing panels considering soil-structure interaction

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Seismic performance of buildings with novel self‐centering base isolation system for earthquake resilience

Seismic resilience of RC bridge with self-centering energy dissipation braces using SMA U-shaped plates

Seismic performance of deficient RC frames retrofitted with SMA-reinforced ECC column jacketing

Seismic Response of Resilient Bridges with SMA-Based Rocking ECC-Reinforced Piers

Comparative seismic analysis of frames with shape memory alloy slip friction dampers

Seismic response control of recentering steel frame with innovative SMA-high damping rubber dampers under sequential earthquakes

Performance‐based optimum seismic design of self‐centering steel moment frames with SMA‐based connections

Seismic Behavior of Superelastic Shape Memory Alloy Spring in Base Isolation System of Multi-Story Steel Frame

Seismic performance factors of quarter-elliptic-braced steel moment frames (QEB-MFs) using FEMA P695 methodology

Earthquake-induced loss assessment of hybrid self-centering piston-based braced frame with friction springs and SMA bars

Seismic Performance of Self-centering Steel Frames with SMA-viscoelastic Hybrid Braces

Seismic Performance Assessment of Steel EBFs with Conventional and Replaceable Yielding Links Designed with ASCE 7-16

Comparative Analysis of Concentrically Braced Frames with FeSMA and Steel BRBs Under Long-Duration Earthquakes

Seismic performance evaluation of a novel resilient steel frame with self-centering rocking columns and replaceable energy-dissipating connections for low-rise structures