Abstract:This study proposes an efficient risk‐targeted framework for integrated optimal seismic design and quantifying target safety of Special Moment‐Resisting Frames (SMRFs) with Buckling‐Restrained Braces (BRBs) in the typical dual steel buildings. This framework provides an automated design procedure formulated as a constrained single‐objective optimization problem to achieve the minimum Life Cycle Cost (LCC) within the Particle Swarm Optimization (PSO) algorithm and can be the basis of current seismic codes for target safety calibration. LCC includes initial construction cost and lifetime seismic losses such as repair cost, repair time, and casualties. FEMA P‐58 methodology is employed for the LCC analysis of the building under possible earthquakes during its lifetime, which is able to take into account potential uncertainties in the hazard‐response‐damage‐loss relationship. An appropriate cost model is developed to estimate the initial and repair cost of the studied BRBs. Minimum requirements of ASCE and AISC codes are considered as design constraints. Nonlinear response history analysis through the Endurance Time (ET) method is utilized to estimate the structural responses versus seismic intensity. Three 4‐, 8‐, and 12‐story steel buildings with dual seismic force‐resisting system consisting of SMRF and BRB (called steel SMRF‐BRB) are selected as the case study. Each building is optimally designed with two approaches: (1) LCC‐based design within the proposed framework and (2) code‐based design to minimize initial construction cost. Comparison of optimized buildings with the two design approaches in terms of structural responses and seismic consequences demonstrates that fulfilling the minimum code requirements at a given seismic hazard level is not sufficient to minimize lifetime seismic losses of steel SMRF‐BRBs. This is because the optimal designs obtained from the code‐based approach are associated with damage concentration, irreparability, and high collapse probability, especially in seismic events more severe than the design level. The proposed LCC‐based approach provides useful information for improving the lifetime seismic performance of steel SMRF‐BRBs.

Earthquake-induced loss assessment of hybrid self-centering piston-based braced frame with friction springs and SMA bars

Self-centering Eccentrically Braced Frames Using Shape Memory Alloy Bolts and Post-Tensioned Tendons

Seismic loss comparison for buildings designed with ductile steel seismic force-resisting systems and with controlled rocking braced frames

Probabilistic Seismic Performance Assessment of RC Frames Retrofitted with External SC-PBSPC BRBF Sub-structures

A hybrid buckling-restrained brace for enhancing the seismic performance of steel moment resisting frames

Adaptive Passive-Control for Multi-Stage Seismic Response of High-Rise Braced Frame Using the Frictional-Yielding Compounded BRBs

Numerical modelling and analysis of buckling-restraint braces in frame buildings due to seismic loads

Seismic responses and resilience of novel SMA-based self-centring eccentrically braced frames under near-fault ground motions

Numerical Investigation on the Efficiency of Self-Centering Two-Yield Buckling Restrained Brace on Low-Rise Steel Frames

Performance-based plastic design of multi-story hybrid braced frames with buckling-restrained braces and shape memory alloy braces

Multi-objective Optimization Design of Buckling-Restrained Braced Frames Based on Performance Evaluation and Risk of Repair Cost and Time

Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained braces

Comparative seismic analysis of frames with shape memory alloy slip friction dampers

Life cycle cost‐based optimization framework for seismic design and target safety quantification of dual steel buildings with buckling‐restrained braces

Analysis of the behavior of reinforced concrete buildings with and without non-buckling braces under the effect of earthquake loads

Assessing and Quantifying the Earthquake Response of Reinforced Concrete Buckling-Restrained Brace Frame Structures

Damage-control design and hybrid tests of a full-scale two-story buckling-restrained braced steel moment frame with sliding gusset connections

Seismic Performance Evaluation of Multi-Story CBFs Equipped with SMA-friction Damping Braces

Seismic design and performance evaluation of steel braced frames with post-tensioned and disc-spring-based self-centering buckling-restrained braces

Performance-based plastic design and seismic fragility assessment for chevron braced steel frames considering aftershock effects

Comparative Analysis of Concentrically Braced Frames with FeSMA and Steel BRBs Under Long-Duration Earthquakes