Abstract:Traditional sacrificial concrete retaining blocks (CRBs) play a significant role in reducing the excessive transverse displacements of bridge superstructures and protecting the substructures from severe damage during seismic events. However, rehabilitating these CRBs after earthquakes is very difficult. Thus, many previous studies proposed the prefabricated retaining blocks (PRBs) with the unbonded post-tensioned prestressing tendons (PTs), which has been proven to be effective in maintaining the same functionality as that of traditional sacrificial CRBs while also simplifying their postearthquake rehabilitation. However, the response mechanisms and influential parameters of the abutment PRB under the horizontal seismic loads are unclear, affecting its further application in practical bridge engineering. This study established the three-dimensional (3D) finite-element (FE) model of the abutment PRB designed by the previous researcher and validated the feasibility and effectiveness of studying its seismic behavior through the available experimental results. Additionally, comprehensive parametric studies were performed to examine the effects of the friction coefficients, initial tension forces, and tensile strength of PTs on the seismic behavior of the abutment PRB. Subsequently, to fully utilize the mechanical merits of ultrahigh-performance concrete (UHPC), this paper proposed the modified abutment UHPC-PRB structures and their hysteretic behavior and damage modes were compared with those of the original ones through numerical simulations and available test results in the literature. Finally, the results indicated that (1) the developed FE models could accurately simulate the seismic behavior of the abutment PRBs; (2) the friction effect between the PRB body and side surface of the abutment stem wall had significant impacts on the hysteretic behavior and energy-dissipation performance of the abutment PRBs; (3) the critical rotational load, horizontal loading strength, deformation ability, energy-dissipation ability, and self-resetting capacity of the abutment PRBs could be improved with the increase of the initial tension force and tensile strength of PTs; and (4) the proposed replaceable abutment UHPC-PRB structures exhibited superior seismic performance and outperformed mechanical merits compared to traditional sacrificial CRBs.

Probabilistic Seismic Vulnerability and Loss Assessment of a Seismic Resistance Bridge System with Post-Tensioning Precast Segmental Ultra-High Performance Concrete Bridge Columns

Seismic performance of bridge with unbonded posttensioned self-centering segmented concrete-filled steel-tube columns: An underwater shaking table test

Design and seismic performance of precast segmental bridge columns repaired with UHPC jacket after earthquake-induced damage

Experimental and Numerical Investigations on Seismic Behavior of Prefabricated Bridge Columns with UHPFRC Bottom Segments

Study on time-varying seismic vulnerability and analysis of ECC-RC composite piers using high strength reinforcement bars in offshore environment

Cyclic loading tests and analyses of posttensioned concrete bridge columns combining cast-in-place and precast segments

Experimental Investigation of Seismic Behavior of UHPC-filled Socket Precast Bridge Column-Foundation Connection with Shear Keys

Seismic Performance of Pre-Fabricated Segmental Bridges with an Innovative Layered-UHPC Connection

Research on Seismic Resilience of Prestressed Precast Segmental Bridge Piers Reinforced with High-Strength Bars Through Experimental Testing and Numerical Modelling

Seismic Performance of Precast Segmental Concrete-Filled Steel-Tube Bridge Columns with Internal and External Energy Dissipaters

Vehicular impact resistance of highway bridge with seismically-designed UHPC pier

Performance of a Seismic-Resilient Precast Segmental Column with UHPC Segments and CFRP Tendon

Innovative Methods to Improve the Seismic Performance of Precast Segmental and Hybrid Bridge Columns under Cyclic Loading

Experimental Study and Numerical Simulation of Precast Segmental Bridge Column with a Central RC Tenon

Cyclic Loading Test and Numerical Modeling on Prefabricated UHPC Tube-Confined Rectangular Bridge Piers with Different Base Connections

Numerical Simulations of Abutment PRB Structures with Post-Tensioned Unbonded Prestressing Tendons for Highway Bridges under Horizontal Seismic Loads

Effect of a Novel Joint Connection of UHPC Wet Joint and Tapered Sleeve Locking-Type Couplers on the Lateral Cyclic Response of Precast Segmental Railway Bridge Columns

Seismic Performance Analysis of Precast Segmental Bridge Columns with Self-Centering Energy Dissipation Device

Experimental and numerical study on seismic performance of precast segmental CFST bridge columns with non-uniform prestressed steel tendons

Mechanistic understanding of precast UHPC segmental beams with external tendons and epoxy joints subject to combined bending and shear

Long-term performance of a continuous box-girder bridge constructed using precast segments with wet ultra-high-performance concrete (UHPC) joints