Abstract:Whilst the main focus of metal Additive Manufacturing (AM) aka metal 3D printing has been to produce fully dense parts; the main aim of this research is to use the technology to fabricate metallic permeable parts with controlled porosity characteristics so that they may be used as a high performance, high-pressure and cleanable and therefore "green" reusable filters for various industrial applications. The fusion bed technology, more specifically Direct Metal Printing (DMP) has been utilized to fabricate test parts with porous structure that was later tested for filtration efficiency. In DMP process, the part is built in thin layers with each layer a cross-sectional slice of the shape. This method makes it possible to design and manufacture intricate parts with detailed internal sections that is not always possible with conventional manufacturing methods. The technique also makes it possible to design and manufacture combination of solid and porous sections in one operation or in another word a complete filter assembly to be used straight off the print with no or minimal post processing required. Another advantage of using DMP is the possibility of seamlessly incorporating features like pleats to increase the filtration area, incorporate additional strengthening structures and support structures if required as well as manufacturing a graded media with larger pores on the outside getting finer as you approach the centre. The printing parameters have been selected to achieve optimum combination of tightly controlled pore size range, size distribution and mechanical strength to promote the optimum filtration efficiency and dirt-holding capacity; at the same time maintaining the structural integrity for operation under high pressures, a wide range of flow conditions, operating temperature, and compatibility with a wide range of process fluids. The results from the first round of tests on scaled down samples demonstrated that the fabricated porous metal parts are suitable to be used in a wide range of applications and operating conditions. They are bi-directional in terms of flow and as a result, they are cleanable and reusable. They can be designed to a variety of shapes and sizes with ease and are recyclable if needed. This approach of manufacturing cleanable filters can reduce the demand for new and newly processed materials. In addition, it can reduce production, distribution, and storage costs. Hence less energy usage, less pollution, and less demand for hazardous waste disposal and associated challenges with disposal and the impact on the environment.

Design, manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D printing technology

The 3D-Printed building and performance of Al2O3 ceramic filters with gradient hole density structures

Process optimization of porous Al 2 O 3 filter via layered extrusion forming

Research on Key Technology of Filter Design and Forming Based on 3D Printing Technology

Glass frit-ink development and relevant process technology for fabricating functionally graded material-structured ceramic filters via binder-jetting 3D printer

Preparation Of Ceramic Foam Filters Via Direct Foaming

Utilizing Powder Bed Fusion Additive Manufacturing Technology to Fabricate Parts with Controlled Porosity and Permeability Characteristics for Filtration Applications

3D-printed surface-patterned ceramic membrane with enhanced performance in crossflow filtration

Optimized Zirconia 3D Printing Using Digital Light Processing with Continuous Film Supply and a Recyclable Slurry System

Hierarchical Ceramic Foams with 3D Interconnected Network Architecture for Superior High-Temperature Particulate Matter Capture

Continuous DLP-based ceramic 3D printing using a composite oxygen-rich film

Application of 3D Printing Technology and Porous Nano-Ceramic Decorative Sheet in Interior Landscape Design

Structure design influencing the mechanical performance of 3D printing porous ceramics

Preparation of Porous Ceramic Support with Inorganic Filtration Membrane

Optimized Zirconia 3D Printing Using Digital Light Processing with Continuous Film Supply and Recyclable Slurry System

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

3D Printing of Hollow Microspheres into Strong Hierarchical Porous Ceramics

Optimizing photocuring properties of ceramic slurry for 3D printing of ceramic membranes

Preparation of Al2O3-Si3N4 Porous Ceramics with a Cactus-Like Architecture for Potential Filters Applications

Preparation and enhanced mechanical properties of novel Al2O3‐C ceramic filter reinforced by microporous powder and SiC whiskers

Fabrication of porous aluminum ceramics beyond device resolution via stereolithography 3D printing