Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

Ethanol-based green-solution processing of α-formamidinium lead triiodide perovskite layers

A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells

Ethanol purification enables high-quality α-phase FAPbI 3 perovskite microcrystals for commercial photovoltaic applications

Solution-processed perovskite solar cells using environmentally friendly solvent system

Fully Solution Processed Pure α‐Phase Formamidinium Lead Iodide Perovskite Solar Cells for Scalable Production in Ambient Condition

Solvent Engineering of Perovskite Crystallization for High Band Gap FAPbBr 3 Perovskite Solar Cells Prepared in Ambient Condition

Controlled growth of perovskite layers with volatile alkylammonium chlorides

Aqueously synthesized δ-phase FAPbI3 for efficient perovskite solar cells

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Controllable Crystallization of Perovskite Films during the Blade-Coating Fabrication Process for Efficient and Stable Solar Cells

All Green Solvent Engineering of Organic-Inorganic Hybrid Perovskite Layer for High-Performance Solar Cells

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells

Green-Solvent-Processed Lead-free Perovskite Solar Cells

Discovery of a New Intermediate Enables One‐Step Deposition of High‐Quality Perovskite Films Via Solvent Engineering

Realizing Efficient Lead‐Free Formamidinium Tin Triiodide Perovskite Solar Cells Via a Sequential Deposition Route

High‐Quality α‐FAPbI 3 Film Assisted by Lead Acetate for Efficient Solar Cells

Preparing High-Efficiency Perovskite Solar Cells

Lead‐Chelating Intermediate for Air‐Processed Phase‐Pure FAPbI3 Perovskite Solar Cells

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Anti-Solvent Engineering Enables Efficient Ambient-Processed Halide Perovskite Solar Cells