Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

High-performance photovoltaic perovskite layers fabricated through intramolecular exchange

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells

Ternary Two‐Step Sequential Deposition Induced Perovskite Orientational Crystallization for High‐Performance Photovoltaic Devices

Preparing High-Efficiency Perovskite Solar Cells

Improved Photovoltaic Performance from High Quality Perovskite Thin Film Grown with the Assistance of PC 71 BM

Photoexcitation dynamics in solution-processed formamidinium lead iodide perovskite thin films for solar cell applications

Photovoltaic Performance of FAPbI3 Perovskite Is Hampered by Intrinsic Quantum Confinement

High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18%

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Discovery of a New Intermediate Enables One‐Step Deposition of High‐Quality Perovskite Films Via Solvent Engineering

Effects of Formamidinium and Bromide Ion Substitution in Methylammonium Lead Triiodide Toward High-Performance Perovskite Solar Cells

Epitaxial Growth of α‐FAPbI3 at a Well‐Matched Heterointerface for Efficient Perovskite Solar Cells and Solar Modules

Polyfluorinated Organic Diammonium Induced Lead Iodide Arrangement for Efficient Two‐Step‐Processed Perovskite Solar Cells

Direct In Situ Conversion of Lead Iodide to a Highly Oriented and Crystallized Perovskite Thin Film via Sequential Deposition for 23.48% Efficient and Stable Photovoltaic Devices

Solvent-assisted Growth of Organic–inorganic Hybrid Perovskites with Enhanced Photovoltaic Performances

Mechanochemistry Advances High‐Performance Perovskite Solar Cells

Anion Exchange Promoting Non-Impurities Enables Conformable and Efficient Inverted Perovskite Solar Cells

Fully Solution Processed Pure α‐Phase Formamidinium Lead Iodide Perovskite Solar Cells for Scalable Production in Ambient Condition

Single‐Crystal Seeds Inducing the Crystallization of High‐Performance α‐FAPbI3 for Efficient Perovskite Solar Cells

Solution‐Processed Laminated Perovskite Layers for High‐Performance Solar Cells