Abstract:This study attempts to clarify the correlation between the structural parameters of vortex finders (diameter ratio and insertion depth) and the strong turbulent flow field and performance of cyclone separators. To elucidate the effects due to the overflow pipe diameter, insertion depth, and Reynolds number on the tangential velocity index (n) and separation efficiency, 0.3D, 0.4D, 0.5D, 0.6D, and 0.7D (where D is the diameter of the cyclone separator’s cylindrical section) were selected as the vortex finder diameter and insertion depth, which were studied using three methods: computational fluid dynamics (CFD) software Fluent, experiments, and artificial neural network simulations. With Fluent, the Reynolds stress model (RSM) of turbulence was adopted to describe transport equations, and the discrete phase model (DPM) for two-phase flow was used to calculate the efficiency and separate particles at different inlet velocities. Experiments were conducted to measure the operational pressure drop and separation efficiency of the system; subsequently, the results were used to validate the CFD calculation results. Finally, a 5–5-1 three-layer artificial neural network was established based on 336 sets of data for values of n obtained from numerical simulations. In addition, a backpropagation (BP) artificial neural network model was employed to predict the correlation between the structural and operational parameters of the cyclone separator and n values. The obtained results indicate that the BP artificial neural network can accurately predict the distribution of n values within the flow field of the cyclone. Increasing the diameter of the vortex finder with the same inlet velocity can reduce the total pressure drop due to the cyclone, thereby reducing the kinetic energy loss and improving the separation efficiency of fine particles. Increasing the insertion depth of the vortex finder leads to an increase in the values of n. Considering the stability of the flow field structure and energy dissipation, an S/D value between 0.5 and 0.6 is preferred.

Performance improvement of a cyclone separator using spiral guide vanes with variable pitch length

Numerical Simulation of Three Dimensional Gas-Particle Flow in a Spiral Cyclone

Micro Gas Cyclone Design and Performance Evaluation to Collect Dust Particles

Study of the performance and flow field of a new spiral-roof cyclone separator

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

Experimental and computational fluid dynamics study on the effects of erosion spiral angle of the cone on cyclone separator performance

Numerical study on the performance of swirl tube based on orthogonal design

Numerical modeling of body shape effect on the performance of a square cyclone separator

CFD Investigation on the Performance of Cyclone Separators with Divergent or Convergent Insertion Pipes

Numerical Study of Gas-Solid Flow in a Square Cyclone Separator with Different Vortex Finders

Numerical simulation of the particle-wall collision strength and swirling effect on the performance of the axial flow cyclone separator

Effects of helical fins on the performance of a cyclone separator: A numerical study

Numerical investigation of hydrocyclone inlet configurations for improving separation performance

Numerical Simulation on the Performance of Axial Vane Type Gas-Liquid Separator with Different Guide Vane Structure

Experimental Research on the Performance of a Cyclone Impeller Type Separator

An Experimental Study of the Structural Optimization of Square Shaped Cyclone Separators

Numerical simulation study of particle self-rotation velocity in cyclone separator

Simulation and experimental study of effect of vortex finder structural parameters on cyclone separator performance

Performance experiments and pressure drop prediction modelling of an energy-saving cyclone separator

Performance Analysis of Gas-Liquid Cylindrical Cyclone （GLCC） Separator with an Inclined and Perforated Wall

Performance evaluation of cyclone separators with elliptical cross-section using large-eddy simulation