Abstract:In this paper, the Ti-6Al-4V(TC4) alloy specimens pre-coated with Ti-Cu-Al multilayer films were plasma nitrided at different temperatures (673K-823K), and their microstructure and mechanical properties were studied. Surface hardness changes induced by pre-coating combined with plasma nitriding were also analyzed and correlated with microstructural features and elemental distribution. Ti-Cu-Al multilayer films with clear interfaces on deformed TC4 alloy were fabricated. The multilayer structure survived after nitriding, and a thick gradient nitrided layer with a gradient distribution of N elements was formed. The bonded nitride on the surface provides high hardness, reaching 948HV at 723K. In addition, the nitride TC4 alloy's wear resistance exhibits a significant improvement compared with the untreated specimen, especially at 823K, the mass wear rate decreased by more than 80%. It is mainly attributed to the N/metal element gradient distribution of the thick nitride layer. The nitriding behavior of α-Ti/Cu/Al was investigated by first-principles calculations. According to the thermodynamic calculation results, N atoms preferentially occupy the octahedral interstitial sites of α-Ti and the tetrahedral interstitial sites of Al. It is worth noting that N atoms have poor thermodynamic stability in Cu, which is consistent with the experimental results. The calculated elastic properties agree with the experimental cross-sectional hardness results, showing a smooth decreasing trend of the complex modulus and hardness on the micrometer length scale and explaining the improved structure performance. These results may provide crucial inspirations for future experimental work preparing high-performance nitrided layers.

Improvement of corrosion and wear resistance of novel Zr-Ti-Al-V alloy with high strength and toughness by thermal nitridation treatment

Effect of Nb and Cu on α/β Phase Transition Temperature and Corrosion Behavior of New Type Zirconium Alloys

Thermal oxidation of novel Zr–Ti–Al–V alloy with high strength and toughness and its influence on the corrosion behavior

Design of amorphous-nanocrystalline films of TiAlCrNbZr x multi-component alloy: The effect of Zr on the corrosion resistance and mechanical properties

Modification mechanism of Ti-6Al-4V alloy with pre-coated Ti-Cu-Al multilayer film treated by ion nitriding: Experiments and first-principles calculations

Effect of Nitriding and Oxidizing on Wear and Corrosion Resistances of Zirconium-Alloyed Titanium Alloy

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Exploring the impact of Al alloying on microstructure and hot nitric acid corrosion resistance of Ti-xAl (x=0, 1, 2, 3, 4, 5) alloys

Improved tribological behavior of plasma-nitrided AlCrTiV and AlCrTiVSi high-entropy alloy films

Enhancement of Wear and Corrosion Resistance of Ti6Al4V Alloy through Hollow Cathode Discharge-Assisted Plasma Nitriding

Investigation on corrosion behavior of Zr-bearing TA10-based titanium alloys

Improving the Microstructure and Mechanical Properties of Zr-Ti Alloy by Nickel Addition

Microstructure and wear behavior of inductive nitriding layer in Ti–25Nb–3Zr–2Sn–3Mo alloys

Improvement of Impact Wear Performance of Ti6Al4V Alloy by Nitrogen Ion Implantation and Nitriding

Microstructure and tribological properties of TiZrV0.5Nb0.5Al refractory high entropy alloys at elevated temperature

Microstructure and Wear Resistance of Ti-3zr-2sn-3mo-15nb (tlm) Alloy

Effects of Ti Addition on Microstructure, Mechanical Properties and Corrosion Resistance of the Cu-Zn-Ni Alloy

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

Wear-resistant ZrN/Ti functionally graded coating prepared on TA18 alloy by double glow plasma alloying

Effect of aluminum addition on microstructure, mechanical properties and high temperature tribological properties of nickel-rich NiTi alloy

Microstructure and properties of a new Al–Cu–Mg–Zn–Zr–Ti heat resistant aluminum alloy