Abstract:In nature, soils are often composed of varying amounts of clay, silt and sand. Variation of the percentage of these compositions can affect the final strength of the soils when stabilised with cement. In this study, focus was placed on clayey soils with different gradation of sand impurities up to 40% in mass. An extensive study of such clayey soils treated with cement was investigated. For the results, it is noted that water:cement ratio was a major influence of strength development of cement-treated clayey soils. In contrast, the soil:cement ratio was found to have minor effects on the strength development. The presence of sand impurities has a significant reduction on the strength development of the cement-treated clayey soil mixture due to more free water available for hydration. The use of free-water:cement ratio is adopted which was shown to be capable of adjusting for such change in amount of free water and water holding capacity of the clay which is determined with Atterberg’s liquid limit tests. The effects of gradation (fine, coarse and well-graded) of the sand impurities were found to affect strength development minimally, owing to similarities in their liquid limits when mixed with clay. Ordinary Portland cement (OPC)-treated clayey soils produced a more rapid gain in strength but lower final strength at 28 days of curing as compared with Portland blast furnace cement (PBFC). This is found to be persistent for different gradation of sand impurities. A linear correlation can be established based on the log of the unconfined compressive strengths developed at different curing age, with slopes of these linear trends found to be similar for PBFC and OPC-treated clayey soil specimens. Finally, a strength prediction model comprising of these findings is developed. The parameters adopted in this model coincide with values proposed by past studies, thereby validating the robustness of the model. The practical benefits from this study offer a quality control scheme to forecast long-term performance of cement-treated clayey soils as well as optimise cement dosage in cement stabilisation to produce a more cost-effective and less environmental-invasive usage of the technology in geotechnical applications.

Strength estimation of cement-treated marine dredged clay under a wide range of water-to-cement ratio

Interactive Influence of Water and Fines Contents on the Strength of Compacted Cement-Stabilized Clayey Sands: Insights and Predictive Framework

A Novel Strength Model for Cement Marine Clay Based on the Mechanical-Chemical Coupling Behavior

Stabilization Nature and Unified Strength Characterization for Cement-Based Stabilized Soils

Fundamental Mechanical Behavior of CMMOSC-S-C Composite Stabilized Marine Soft Clay

Study on Mixing Cement-Waste By-Product to Stabilize Soft Marine Clay

Effect of Salinity on Strength Behavior of Cement-treated Dredged Clay at High Initial Water Contents

Strength evaluation of marine clay stabilized by cementitious binder

Deformation and Stability of the Seawall, Considering the Strength Uncertainty of Cement Mixing Piles

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

A new method for predicting compressive strength of cement-based materials

Mechanical and microstructural properties of cement-treated marine dredged clay with red mud and phosphogypsum

Experimental Study on Engineering Properties of Cemented Soil with High Water Content

Analysis of the influence of different soil properties on the strength characteristics of cement soil

Strength reduction mechanism of cement-treated soil under seawater environment

Distinguishing the effects of cementation versus density on the mechanical behavior of cement-based stabilized clays

Mechanical and microstructural properties of cemented marine dredged clay with pre-hydrated ground granulated blast furnace slag

Strength Properties and Prediction Model of Cement-Solidified Clay Considering Organic Matter and Curing Temperature

Influence of grain size gradation of sand impurities on strength behaviour of cement-treated clay

Unconfined Compressive Strength of Cement-Stabilized Qiantang River Silty Clay

Enhancing the mechanical properties of marine clay using cement solidification