Abstract:Portland cements (PCs) and cement blends are multiphase materials of different fineness, and quantitatively analysing their hydration pathways is very challenging. The dissolution (hydration) of the initial crystalline and amorphous phases must be determined, as well as the formation of labile (such as ettringite), reactive (such as portlandite) and amorphous (such as calcium silicate hydrate gel) components. The microstructural changes with hydration time must also be mapped out. To address this robustly and accurately, an innovative approach is being developed based on in situ measurements of pastes without any sample conditioning. Data are sequentially acquired by Mo Kα1 laboratory X-ray powder diffraction (LXRPD) and microtomography (µCT), where the same volume is scanned with time to reduce variability. Wide capillaries (2 mm in diameter) are key to avoid artefacts, e.g. self-desiccation, and to have excellent particle averaging. This methodology is tested in three cement paste samples: (i) a commercial PC 52.5 R, (ii) a blend of 80 wt% of this PC and 20 wt% quartz, to simulate an addition of supplementary cementitious materials, and (iii) a blend of 80 wt% PC and 20 wt% limestone, to simulate a limestone Portland cement. LXRPD data are acquired at 3 h and 1, 3, 7 and 28 days, and µCT data are collected at 12 h and 1, 3, 7 and 28 days. Later age data can also be easily acquired. In this methodology, the amounts of the crystalline phases are directly obtained from Rietveld analysis and the amorphous phase contents are obtained from mass-balance calculations. From the µCT study, and within the attained spatial resolution, three components (porosity, hydrated products and unhydrated cement particles) are determined. The analyses quantitatively demonstrate the filler effect of quartz and limestone in the hydration of alite and the calcium aluminate phases. Further hydration details are discussed.

Phase analysis and hydration behavior of fine and coarse particle fractions contained in a commercial Portland cement

Interactions Between Organic and Inorganic Phases in PA- and PU/PA-Modified-Cement-Based Materials

The Influence of Mayenite Employed as a Functional Component on Hydration Properties of Ordinary Portland Cement

Advances in understanding hydration of Portland cement

Synthesis of alite, belite and ferrite in both monophase and polyphase states and their hydration behavior

How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes

Mix and measure II: joint high-energy laboratory powder diffraction and microtomography for cement hydration studies

Effect of Mineral Composition and w/c Ratios to the Growth of AFt during Cement Hydration by In-Situ Powder X-ray Diffraction Analysis

The Early Hydration of OPC Investigated by In-Situ XRD, Heat Flow Calorimetry, Pore Water Analysis and 1H NMR: Learning about Adsorbed Ions from a Complete Mass Balance Approach

Portland/Sulfoaluminate Cement Blends for the Control of Early Age Hydration and Yield Stress

EXPERIMENTAL STUDY OF CEMENT PARTICLE SIZE EFFECT ON HYDRATION PROCESS OF CONCRETE

Advances in understanding cement hydration mechanisms

Effect of fly ash on the atomic scale structure of C–S–H during Portland Cement hydration

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Phase separation of recycled concrete powder during grinding and consequent influences on its hydration behaviors in cement paste

High-Volume Mineral Admixtures Cement: The Effects of Particle Size Distribution

Performance of preserved alpha prime belite phase within belite-ye'elimite-ferrite clinker

Effect of Polymer Latexes with Cleaned Serum on the Phase Development of Hydrating Cement Pastes

Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization

Estimating the Impact of Nanophases on the Production of Green Cement with High Performance Properties

Influence of Fineness Levels and Dosages of Light-Burned Dolomite on Portland Cement Performance