Abstract:Xinjiang has a temperature difference of 20°C between day and night, interannual temperature difference of 50°C, the control of the temperature cracks in mass concrete becomes difficult. Although low-heat portland (P·LH) cement concrete containing fly ash (FA) can reduce hydration heat, the mismatch between its mechanical and thermal properties is still not fully resolved. An attempt to explore the effect of FA on the competitive hydration reaction of C3A and C3S at super-early ages, and how this effect changes the physical and chemical properties of hardened cement pastes by electrical resistivity and zeta potential and common microstructure test methods, and to provide a theoretical basis for optimization of mechanical and thermal properties of P·LH cement concrete with FA. Results showed that in the fast dissolution stage, a numerous {Ca6[Al(OH)6]224H2O}6+ ions and a very small amount of H3SiO4−/H2SiO42− ions were formed, and incorporating 20%, 30%, 40% FA primarily inhibited the Al(OH)63− hydration and the {Ca6[Al(OH)6]224H2O}6+ generation, resulting in the generation time of AFt in comparison with pure cement, respectively, delayed by 44%, 140%, and 524%. This phenomenon decreased the nucleation and crystallization growth rate of AFt and Ca(OH)2 in the induction stage, and reduced the consumption of gypsum in the acceleration stage. Hence, monosulfoaluminate did not exist for pastes with more than 30% FA, and the number of particles involved in the reaction for the P·LH cement stone with 20%, 30%, and 40% FA decreased by 4.0%, 46.5%, and 52.0% in the deceleration stage compared with the pure cement. The research results can provide a theoretical reference for modifying chemical properties of FA to meet the matching of mechanical strength and thermal of P·LH cement.

EXPERIMENTAL STUDY OF CEMENT PARTICLE SIZE EFFECT ON HYDRATION PROCESS OF CONCRETE

Experimental Study of Cement's Particle Size Effects on the Compressive Strength of Concrete

Model for Simulating the Effects of Particle Size Distribution on the Hydration Process of Cement

Simulation of the effects of the particle size distribution on cement hydration

Hydration of Ultrafine and Ordinary Portland Cement at Early Ages

Simulation of the Effects of Cement Particle Size on Adiabatic Temperature Rise of Concrete

Exploring the Influence Factors of Early Hydration of Ultrafine Cement

High-Volume Mineral Admixtures Cement: The Effects of Particle Size Distribution

Micro Expressions of Cement Hydration Kinetics

The Influence of Mayenite Employed as a Functional Component on Hydration Properties of Ordinary Portland Cement

Preparation of Nano-Sized C-S-H and Its Acceleration Mechanism on Portland Cement Hydration at Different Temperatures

Recent Development on Understanding Cement Hydration Mechanism and Effects of Chemical Admixtures on Cement Hydration

Study on optimization of hydration process of blended cement

Experimental Investigation and Numerical Simulation for Chloride Diffusivity of Cement Paste with Elliptical Cement Particles

How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes

Study on Mechanical and Microscopic Properties of Fly Ash Cement-Based Materials in High Geothermal Environment

Improvement of the Hydration Kinetics of High Ferrite Cement: Synergic Effect of Gypsum and C 3 S–C 4 AF Systems

The effect of curing regimes on the hydration products of lightweight ultra-high performance concrete: From experiments to MD simulations

Effects of Nano-CSH on the hydration process and mechanical property of cementitious materials

Effect of Different Particle Sizes of Nano-Sio2 on the Properties and Microstructure of Cement Paste

Carbonation and Related Behaviors of Hardened Cement Pastes under Different Hydration Degrees