Abstract:Currently, low heat Portland (LHP) cement is widely used in mass concrete structures. The magnesia expansion agent (MgO) can be adopted to reduce the shrinkage of conventional Portland cement-based materials, but very few studies can be found that investigate the influence of MgO on the properties of LHP cement-based materials. In this study, the influences of two types of MgO on the hydration, as well as the shrinkage behavior of LHP cement-based materials, were studied via pore structural and fractal analysis. The results indicate: (1) The addition of reactive MgO (with a reactivity of 50 s and shortened as M50 thereafter) not only extends the induction stage of LHP cement by about 1–2 h, but also slightly increases the hydration heat. In contrast, the addition of weak reactive MgO (with a reactivity of 300 s and shortened as M300 thereafter) could not prolong the induction stage of LHP cement. (2) The addition of 4 wt.%–8 wt.% MgO (by weight of binder) lowers the mechanical property of LHP concrete. Higher dosages of MgO and stronger reactivity lead to a larger reduction in mechanical properties at all of the hydration times studied. M300 favors the strength improvement of LHP concrete at later ages. (3) M50 effectively compensates the shrinkage of LHP concrete at a much earlier time than M300, whereas M300 compensates the long-term shrinkage more effectively than M50. Thus, M300 with an optimal dosage of 8 wt.% is suggested to be applied in mass LHP concrete structures. (4) The addition of M50 obviously refines the pore structures of LHP concrete at 7 days, whereas M300 starts to refine the pore structure at around 60 days. At 360 days, the concretes containing M300 exhibits much finer pore structures than those containing M50. (5) Fractal dimension is closely correlated with the pore structure of LHP concrete. Both pore structure and fractal dimension exhibit weak (or no) correlations with shrinkage of LHP concrete.

Influence of Fineness Levels and Dosages of Light-Burned Dolomite on Portland Cement Performance

Enhanced Carbonation Curing of Cement Pastes with Dolomite Additive

Influence of Mineral Admixtures on the Properties of Magnesium Oxychloride Cement Lean Concrete

Influence of Lightly Burned MgO on the Mechanical Properties and Anticarbonization of Cement-Based Materials

Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials

Influence of Dolomite Rock Powder and Iron Tailings Powder on the Electrical Resistivity, Strength and Microstructure of Cement Pastes and Concrete

Understanding strengthening mechanisms of Ca-LDO on cementitious materials

Effects of Dolomitic Limestone on the Properties of Magnesium Oxysulfate Cement

The Synergistic Effect of Calcained Coal-Series Kaolinite and Limestone on the Hydration of Portland Cement

Impacts of Mg/Al-layered double hydroxide modified with polycarboxylate on the properties of cement paste

The Influence of Mayenite Employed as a Functional Component on Hydration Properties of Ordinary Portland Cement

Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process

Effects of dolomite powder on properties of environment-friendly cement asphalt emulsion composites

How Competitive Hydration between C 3 A and C 3 S in the Fast Dissolution Stage Affects the Hydration of Low-Heat Portland Cement Blended Pastes

Influence of MgO on the Hydration and Shrinkage Behavior of Low Heat Portland Cement-Based Materials via Pore Structural and Fractal Analysis

High-Volume Mineral Admixtures Cement: The Effects of Particle Size Distribution

Study on Strength and Microstructure of Cement-Based Materials Containing Combination Mineral Admixtures

Compressive strength and environmental impact of sustainable blended cement with high-dosage Limestone and Calcined Clay (LC2)

Effects of Layered Double Hydroxide Nanosheets with Different Cations on the Compressive Strength of Cement Composites

Characterization and adaptability of layered double hydroxides in cement paste

Chloride Binding Behavior and Pore Structure Characteristics of Low-Calcium High-Strength Cement Pastes