Abstract:In recent years, perovskite quantum dots (PQDs) with the incorporation of transition-metal ions for reducing toxicity and enhancing stability have been in a research hotspot. However, the PQDs containing transition-metal ions are quite unstable and display low photoluminescence quantum yields (PLQYs), owing to the existence of defects. Herein, we have endeavored to introduce simultaneous cation and anion exchange with cobalt and chloride ions into the host CH3NH3Pb1–xCoxBr3–2xCl2x PQDs followed by matrix encapsulation via poly(methyl methacrylate) (PMMA) as a favorable approach to stabilize PQDs with improved PLQY. We have utilized cobalt chloride as the precursor for doping ions. The emission wavelength can be regulated from green to cyan color with the increase in doping concentration without negotiating on color quality, which is believed to be the modification of band gap and corresponding electron density estimated from the density functional theory. A high PLQY of 95% is observed even after the incorporation of cobalt and chloride ions into host PQDs. We demonstrate white light-emitting diode (LED) prototypes for backlight applications using a PQDs/PMMA composite on a blue LED chip, which exhibits excellent stability toward an ambient and robust atmosphere and provides a wide-color gamut of 124% of the NTSC standard. This research paves a way for the research community to synthesize highly efficient, color-tunable PQDs for wide-color backlighting applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c03019?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c03019</a>.Photographs of a MAPb1–xCoxBr3–2xCl2x perovskite precursor without and with ligands (Figures S1 and S2); photographs of MAPb1–xCoxBr3–2xClx perovskite quantum dots and thin films (Figures S3 and S4); XRD of the MAPb1–xCoxBr3 (Figure S5) PQDs and MAPbBr3: x (MACl) (Figure S6); polyhedral representation of MAPbBr3 and MAPb1–xCoxBr3–2xClx (Figure S7–S12); variation in the lattice constant, strain, and cell volume of MAPb1–xCoxBr3–2xClx (Table S1, Figures S13 and S14); PL emission and band gap of MAPb1–xCoxBr3 and MAPb1–xCoxBr3–2xCl2x PQDs (Figures S15 and S16); variation of radiative rate (KR), nonradioactive transition rate (KNR), and KR/KNR of MAPb1–xCoxBr3–2xCl2x PQDs (Figure S17); elemental mapping (Figure S18); DFT simulation results of MAPbBr3 and MAPb1–xCoxBr3–2xCl2x PQDs (Figure S19); PL spectra of MAPbBr3 and MAPb1–xCoxBr3–2xCl2x PQDs (Figure S20); PL emissions of PQDs: PMAA and MAPb1–xCoxBr3–2xCl2x QDs/PMMA sheets (Figures S21 and S22); comparative PL spectra of PQD solution and PQDs/PMMA sheets (Figure S23); variation of the color coordinate, purity, 3D scan of emission spectroscopy, electroluminescence spectra, and digitized image for cobalt-ion-doped MAPbBr3 PQDs in PMMA (Figure S24); emission of undoped and doped MAPbBr3 thin films on blue LEDs (Figures S25–S27); color gamut of obtained white LEDs for undoped/doped and unencapsulated/encapsulated MAPbBr3 PQDs (Figure S28) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c03019/suppl_file/an0c03019_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simple purification for highly luminescent MAPbI3 perovskite quantum dots (PeQDs)

Highly luminescent MAPbI3 perovskite quantum dots with a simple purification process via ultrasound-assisted bead milling

Suppressing Growth Strategy on Synthesizing Stable and High-Quality Blue-Emitting CsPbBr3 Quantum Dots

Suppressing Ion Migration of Mixed‐Halide Perovskite Quantum Dots for High Efficiency Pure‐Red Light‐Emitting Diodes

One-step formation of core/shell structure based on hydrophobic silane ligands for enhanced luminescent perovskite quantum dots

Near‐Unity Quantum Yield and Superior Stable Indium‐Doped CsPbBr x I 3− x Perovskite Quantum Dots for Pure Red Light‐Emitting Diodes

Synchronously Polishing the Lead-Rich Surface and Passivating Surface Defects of CsPb(Br/I)3 Quantum Dots for High-Performance Pure-Red PeLEDs

Near‐Unity Quantum Yield and Superior Stable Indium‐Doped CsPbBrxI3−x Perovskite Quantum Dots for Pure Red Light‐Emitting Diodes

Spectrally Stable and Efficient Pure Red CsPbI 3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

MAPbBrxCl3-x quantum dots in Pb(OH)Br for stable blue light-emitting devices

In situ and General Multidentate Ligand Passivation Achieves Efficient and Ultra‐Stable CsPbX3 Perovskite Quantum Dots for White Light‐Emitting Diodes

Spectrally Stable and Efficient Pure Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

Highly luminescent and stable MAPbBr 3 quantum dot fabrication via a hybrid capping ligand

All-Inorganic Perovskite Quantum Dots Based on InX 3 -Trioctylphosphine Oxide Hybrid Passivation Strategies for High-Performance and Full-Colored Light-Emitting Diodes

Nucleophilic Reaction‐Enabled Chloride Modification on CsPbI3 Quantum Dots for Pure Red Light‐Emitting Diodes with Efficiency Exceeding 26 %

In Situ Halide Insertion for Efficient and Stable Pure‐Red Perovskite Light‐Emitting Diodes

One‐Step Polymeric Melt Encapsulation Method to Prepare CsPbBr 3 Perovskite Quantum Dots/Polymethyl Methacrylate Composite with High Performance

In-Situ Surface Repair of FAPbBr3 Quantum Dots toward High-Performance Pure-Green Perovskite Light-Emitting Diodes

In situ confined growth of ultrasmall perovskite quantum dots in metal-organic frameworks and their quantum confinement effect

CH 3 NH 3 Pb 1– x Co x Br 3–2 x Cl 2 x Perovskite Quantum Dots for Wide-Color Backlighting

Double buffer of MAPbBr3 QDs using a bulk crystal source by the LARP method and MABr modifier for CsPbBr3 perovskite light-emitting diodes