Abstract:All-inorganic perovskite quantum dot (PeQD) light-emitting diodes (QLEDs) are promising candidates for the next-generation flat-panel displays and semiconductor lighting technology. However, the stability issues severely limit their commercial applications. In this study, highly stable CsPbX3 (X = Cl, Br, I) PeQD films were prepared using InX3 (X = Cl, Br, I) and trioctylphosphine oxide (TOPO) as inorganic–organic hybrid ligands to passivate the surface defects of PeQDs. The obtained InX3-TOPO-CsPbX3 PeQDs not only have high photoluminance quantum yields (PL QYs) and very narrow emission (14–35 nm) but also possess long-term stability. This is mainly due to the synergistic effect of InX3 and TOPO inorganic–organic surface ligand passivation, which can effectively inhibit the halogen vacancy and reduce the surface defect of PeQDs. In addition, the chemical states of InBr3-TOPO-CsPbBr3 PeQDs were analyzed by XPS technology and it was found that InX3-TOPO synergistic surface passivation can effectively reduce the Pb═O bond in the crystal lattice. Moreover, full-colored perovskite QLEDs based on InX3-TOPO-CsPbX3 PeQDs were achieved by using ZnO/PBD as the double electron transport layer, NiO/TFB as the double hole transport material, and InX3-TOPO-CsPbX3 PeQDs as the light-emitting layer. The EQE (%) and luminance (cd m–2) of red, green, and blue QLEDs based on these InX3-TOPO-CsPbX3 PeQDs were 8.2% and 9080 cd m–2, 7.8% and 18,600 cd m–2, and 1.62% and 164 cd m–2, respectively. This cooperative effect based on the InX3-TOPO hybrid passivation strategy will open a way for the preparation of highly efficient, stable, and color-tunable perovskite QLEDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00951?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00951</a>.PL spectrums, PL decay times, and X-ray diffraction (XRD) patterns of pure CsPbBr3, InBr3-CsPbBr3, TOPO-CsPbBr3, and InBr3-TOPO-CsPbBr3 PeQDs, respectively; TEM image and size distribution histograms of InBr3-TOPO-passivated CsPbBr3 and unpassivated CsPbBr3 QDs; SEM images of perovskite quantum dots films at different mole ratios of InBr3: TOPO: PbBr2; High-resolution XPS of O 1s and CIE color coordinates; SEM morphologies of blue, green, and red InX3-TOPO-CsPbX3 PeQDs films; Cross-section SEM of QLEDs and the stability of InX3-TOPO-CsPbX3 PeQD films; PL QYs of InX3-TOPO-CsPbX3 PeQDs; PL decay parameters of pure CsPbBr3 QDs, TOPO-CsPbBr3 QDs, InBr3-CsPbBr3 QDs, and InBr3-TOPO-CsPbBr3 QDs; and EL parameters of red, green, and blue InX3-TOPO-passivated CsPbX3 perovskite QLEDs and unpassivated CsPbX3 QLEDs (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00951/suppl_file/el0c00951_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Near‐Unity Quantum Yield and Superior Stable Indium‐Doped CsPbBrxI3−x Perovskite Quantum Dots for Pure Red Light‐Emitting Diodes

Near‐Unity Quantum Yield and Superior Stable Indium‐Doped CsPbBr x I 3− x Perovskite Quantum Dots for Pure Red Light‐Emitting Diodes

Bright and Stable Red Perovskite LEDs under High Current Densities.

Nucleophilic Reaction‐Enabled Chloride Modification on CsPbI3 Quantum Dots for Pure Red Light‐Emitting Diodes with Efficiency Exceeding 26 %

Synergistic Effect of Indium Doping and Chlorine Surface Passivation on CsPbI3 Perovskite Quantum Dots for Deep-Red Light-Emitting Devices.

Spectrally Stable and Efficient Pure Red CsPbI 3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

Suppressing Ion Migration of Mixed‐Halide Perovskite Quantum Dots for High Efficiency Pure‐Red Light‐Emitting Diodes

All-Inorganic Perovskite Quantum Dots Based on InX 3 -Trioctylphosphine Oxide Hybrid Passivation Strategies for High-Performance and Full-Colored Light-Emitting Diodes

Spectrally Stable and Efficient Pure Red CsPbI3 Quantum Dot Light-Emitting Diodes Enabled by Sequential Ligand Post-Treatment Strategy

Synchronously Polishing the Lead-Rich Surface and Passivating Surface Defects of CsPb(Br/I)3 Quantum Dots for High-Performance Pure-Red PeLEDs

Spectrally Stable Pure Red CsPbI3 Quantum Dots Light‐Emitting Diodes via Effective Low Temperature Gradient Centrifugation Separation and Surface Modification

Highly Stable Mixed Halide Perovskite Nanocrystals for High Performance Pure‐Red Light‐Emitting Diodes

Stable and efficient CsPbI3 quantum-dot light-emitting diodes with strong quantum confinement

Quasi‐2D CsPbBr X I 3− X Composite Thin Films for Efficient and Stable Red Perovskite Light‐Emitting Diodes

P‐9.3: High‐Performance Red Perovskite QLEDs Based on Low‐Toxicity Zn‐Pb Alloy Perovskite QDs Passivated by Inorganic Ligands

In situ and General Multidentate Ligand Passivation Achieves Efficient and Ultra‐Stable CsPbX3 Perovskite Quantum Dots for White Light‐Emitting Diodes

Efficient and Stable CF 3 PEAI-Passivated CsPbI 3 QDs toward Red LEDs

Pure Red Emitting Composites with Nearly 100% Solid–state Photoluminescence Quantum Yield Obtained by In-situ Growth Sr2+- doped Hybrid Halides CsPb(Br,I)3 Perovskite Quantum Dots in Mesoporous Silica

Perovskite Quantum Dots with Ultrahigh Solid-State Photoluminescence Quantum Efficiency, Superior Stability, and Uncompromised Electrical Conductivity.

Capping Ligand Engineering Enables Stable CsPbBr3 Perovskite Quantum Dots toward White-Light-Emitting Diodes.

A Multifunctional "halide‐Equivalent" Anion Enabling Efficient CsPb(Br/I)3 Nanocrystals Pure‐Red Light‐Emitting Diodes with External Quantum Efficiency Exceeding 23%