Study on Melting–Precipitation Evolution of WC in Ni/WC-12Co Coating during Laser Cladding and Tribological Properties

Eryong Liu,Jie Zhang,Ze Liu,Shuangming Du,Hui Cai,Huiling Du,Zhongtang Gao

DOI: https://doi.org/10.1007/s11665-022-07434-8

IF: 2.3

2022-09-30

Journal of Materials Engineering and Performance

Abstract:Ni/WC-12Co cladding coating was prepared by laser cladding with the agglomerated WC as the reinforced phase. Microstructure analysis showed that main phases of the Ni/WC-12Co cladding coating were γ -Ni, ( γ -Ni, WC) Eutectic , WC, and W 2 C. At higher heat input state (2 mm/s), the content and particle size of WC reinforcing phase increased, indicating that the WC appeared melting precipitation growth phenomenon. At lower heat input state (6 mm/s), the particle size of the WC reinforcing phase decreased, and its distribution became uniform with the decrease of the cooling rate. Furthermore, the tribological performance of micro-nano WC-reinforced Ni-based cladding coating (6 mm/s) exhibited excellent wear resistance under the conditions of dry sliding and 3.5 wt.% NaCl. In addition, under erosion conditions, the wear resistance of Ni-based cladding coating (6 mm/s) was nearly a hundred times lower than that of the large spherical WC-reinforced Ni-based cladding coating. Therefore, by controlling the melting and precipitation of WC, a micro-nano WC-reinforced Ni-based coating with excellent mechanical properties was prepared by laser cladding, which provided a new idea for the research and development of micro-nano WC-reinforced Ni-based cladding coating.

materials science, multidisciplinary