Abstract:High-performance composites made from polymer matrix materials with a long-life span, durability, and low weight are needed in the automotive, household products, and aerospace industries. Lightweight, good specific stiffness, and excellent specific quality are all characteristics of polymer fiber–reinforced composites. The current study examines the mechanical and wear characteristics of PALF/sisal fiber and silicon nanoparticle (SiO 2 )–reinforced hybrid polymeric composites with various weight percentages, such as 0–8 wt%. Employing mechanical mixing and sonication, SiO2 NPs are dispersed inside a polymer matrix throughout the production process. After that, the nanocomposites are thoroughly characterized to determine their mechanical characteristics, such as their tensile strength, bending strength, and impact strength. Furthermore, tribological experiments like pin-on-disc and wearing measurements of volume are used to evaluate the wear resistance of the hybrids. The C-type hybrids had the greatest mechanical characteristics among the five distinct types of hybrids (i.e., 53.36 MPa tensile, 61.25 MPa flexural, and 4.98 J of impact energy). Adding 4 wt.% silicon nanoparticles decreases volumetric degradation by 8–13% even under typical loading conditions when compared to A-type hybrids. The presence of silicon nanofillers in the fiber matrix composition could be responsible for the lower tendency for volumetric degradation. The rate of wear was noticed to decrease as silicon content increased, and then, after reaching the minimum values for C-type composites, wear started rising as silicon content increased further. To comprehend the entire performance of the nanocomposites, the physical variables, such as density and retention of water, are also investigated. The theoretical and experimental densities of nanocomposites are 1.221–1.253 g/cm 3 and 1.211–1.24 g/cm 3 , respectively, and have been observed to rise with increasing silicon particle concentration. The findings will aid in the creation of environmentally friendly and high-performing materials for use in a variety of industries, including the packaging sector, construction, and automobile sectors, where enhanced mechanical features and durability against wear are important. In the end, this study provides expanded knowledge of the viability of using SiO2 nanoparticles to improve the performance of organic fiber–reinforced polymeric composites.

Mechanical properties of polymer matrix/glass fiber composites containing metal/hybrid nanoparticles-an overview

Mechanical Properties of Polymer Nanocomposites with Randomly Dispersed and Cross-Linked Two-Dimensional Diamond

Mechanical Characterization of Hybrid Nano-Filled Glass/Epoxy Composites

Recent Reviews on Hybrid Nano Reinforcements for Improving Mechanical Properties of Polymers for sustainable applications

Synergetic effect of incorporating graphene, CNT and hybrid nanoparticles on the mechanical properties of glass fiber reinforced epoxy laminated composites

A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites

Improvement of low-velocity impact and tribo-mechanical properties of unsymmetrical hybrid composites through addition of nanoclay

Review of Hybrid Fiber Based Composites with Nano Particles—Material Properties and Applications

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Mechanical and quasi-static puncture behavior of hybrid glass/Kevlar/carbon fiber laminate composites with graphene nanoparticles

Effectiveness of silicon nanoparticles on the mechanical, wear, and physical characteristics of PALF/sisal fiber–based polymer hybrid nanocomposites

Effects of silica nanoparticles on glass and carbon fiber epoxy composites

Fabrication and Mechanical Testing of Glass Fiber Reinforced Epoxy Matrix Composites Modified with Powdered Metallic Fillers

Investigation of mechanical and electrical properties of photopolymer nanocomposites reinforced with carbon‐based nanoparticles produced by digital light processing 3D printing technique

Effects of carbon‐based nanoparticles on the properties of poly(lactic acid) hybrid composites containing basalt fibers and carbon‐based nanoparticles processed by injection molding

A state-of-the-art review on potential applications of natural fiber-reinforced polymer composite filled with inorganic nanoparticle

Effect of bio nanofiller in influencing the carbon and E-glass fabric reinforced composites

A study on thermal conductivity and thermogravimetric analysis of glass fiber epoxy resin composites modified with silicon carbide and copper nanoparticles

Influence of hybrid nano/micro particles on the mechanical performance of cross-ply carbon fibre fabric reinforced epoxy polymer composite materials

Metal Matrix Nanocomposites: A Brief Overview

Synthesis and Characterization of Hybrid Fiber-Reinforced Polymer by Adding Ceramic Nanoparticles for Aeronautical Structural Applications