Abstract:Modifying bismaleimide (BMI) resin to improve its toughness and flame retardancy without sacrificing the glass transition temperature (Tg) and thermal decomposition stability is still a challenge. In this study, we employed the allyl ether of resveratrol (AER) and eugenol allyl ether grafted polysiloxane (PMES‐Allyl) to co‐modify BMI resin. For the BMI/AER/PMES‐Allyl (BAPA) resin, the content of PMES‐Allyl was 15 wt%, and the molar ratio of maleimide and allyl groups was controlled as 1:0.8. Compared to commercial 2,2′‐diallyl bisphenol A modified BMI (BD) resin, the BAPA resin exhibited superior thermal properties after curing, due to the role of AER in improving the crosslinking density and chain rigidity of the network. The cured BAPA resin had a Tg more than 380°C, and its initial thermal decomposition temperature (Td5%) and char yield (Y800°C) reached 424.8°C and 46.4%, respectively. Meanwhile, PMES‐Allyl as a rubber phase could effectively improve the toughness of the cured resin. The impact strength of the cured BAPA resin was 15.2 kJ/m2. Moreover, the two modifiers both helped to improve the flame retardancy of the material. Compared with the cured BD resin, the cured BAPA resin showed a decrease of peak heat release rate (PHRR), total heat release (THR), and maximum average rate of heat emission (MARHE) by 25.5%, 35.5%, and 31.5%, respectively. Its total smoke production (TSP) was only 35.6% of that of the cured BD resin. In addition, the cured BAPA resin also displayed a lowered water absorption and improved thermal aging resistance. Therefore, it is suggested to be a promising and high‐performance thermosetting resin for cutting‐edge applications.

Curing kinetics, thermal and erosive wear characteristics of bismaleimide blends modified by polyaryletherketone

Study on Curing Kinetics and Thermal Properties of Bismaleimide Resin Containing Ether Linkage

Ano-Scale Mechanical, Viscoelastic, and Tribological Behaviors of Polyaryletherketone Modified Bismaleimide Blends

Morphology and mechanical properties of poly(ether-imide)-modified polycyanurates

The Effect of Bismaleimide on Thermal, Mechanical, and Dielectric Properties of Allyl-Functional Bisphthalonitrile/bismaleimide System

Studies of modified bismaleimide resins Part I The influence of resin composition on thermal and impact properties

Enhanced toughness and thermal properties of bismaleimide resin based on the synergistic effect of reactive amino‐terminal poly(phthalazinone ether nitrile sulfone) and bisallyl bearing diphenol group

Bismaleimide-modified methyl-di(phenylethynyl)silane blends and composites: Cure characteristics, thermal stability, and mechanical property

Bismaleimide resin co‐modified by allyl ether of resveratrol and allyl ether of eugenol‐grafted polysiloxane with enhanced toughness, heat resistance, and flame retardancy

Hierarchical Curing Mechanism in Epoxy/bismaleimide Composites: Enhancing Mechanical Properties Without Compromising Thermal Stabilities

POLYESTERIMIDE-MODIFIED BISMALEIMIDE RESINS. I. EFFECT OF POLYESTERIMI DE CONTENT

Toughened of bismaleimide resin with improved thermal properties using amino-terminated Poly(phthalazinone ether nitrile sulfone)s

Study of novel heat resistant BMI modified epoxy resin

Optimization and preparation of an allyl phenoxy-modified bismaleimide resin

Preparation and Properties of High Performance Bismaleimide Resins Based on 1,3,4-Oxadiazole-containing Monomers

Influence of Composition on the Properties of BMI Neat Resins and BMI/T300 Composites

Synthesis of a Novel Hyperbranched Polyimide for Reinforcing Toughness and Insulating Properties of Bismaleimide Resin

Copolymerizing Behavior and Processability of Allyl-Functional Bisphthalonitrile/bismaleimide System

Synthesis and Characterization of Hyperbranched Epoxy with Terminal Ally Group and Its Application of Toughen Bismaleimide

One‐pot synthesis of hyperbranched poly(aryl ether ketone)s for the modification of bismaleimide resins

Properties of Toughened Bismaleimide and Allylated Benzoxazine Blends