Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. The silicon carbide particle-reinforced matrix composites, or SiCp/Al, have excellent mechanical qualities, but producing them is quite difficult since the SiC particles' and the Al matrix's properties differ greatly from one another. During the cutting process, the Ra local oscillation phenomena takes place; that is, surface roughness seems to grow, decrease, and then increase as the cutting depth increases within a particular cutting depth range while maintaining the same cutting speed and feed. To find out why this behavior occurred, a cutting experiment and a simulation analysis of SiCp/Al composites were performed. Tests were conducted to find out how varied cutting depths affected surface roughness, and a finite element model for two-dimensional cutting was created. Based on the data, it can be concluded that Ra's local oscillation phenomena is responsible for the surface quality at various cutting speeds. At 100 mm/s, 200 mm/s, 300 mm/s, and 400 mm/s, respectively, the mutation's surface quality improved by 29.6%, 14.3%, 19.6%, and 30.7% prior to the cutting depth. The analysis is justified by the fact that the depth of cut is increasing, the way in which particles are removed has changed and the percentage of scratches appears to be decreasing. As aluminium is a plastic material, plastic deformation occurs during cutting by the sub-cutting edge of the extrusion, coating the machined surfaces and producing fine cracks rather than plough furrows. In a sense, increasing the cutting thickness results in larger chips, more force on the particles in the cutting path and easier removal. At the same time, it reduces the width of the chip in future cuts, improving the surface quality of the process.

Surface Morphology and Kerf Quality During Fiber Laser Cutting of High Volume Fraction SiC Particles-Reinforced Aluminum Matrix Composites

Investigation on the machinability of SiCp/Al composite by in-situ laser assisted diamond cutting

Ablated surface morphology evolution of SiCp/Al composites irradiated by a nanosecond laser

Pulsed Laser Ultrasonic Vibration-Assisted Cutting of SiCp/Al Composites through Finite Element Simulation and Experimental Research

Investigation on the impact of thermal softening effect induced by nanosecond pulsed laser-assisted cutting on the deformation mechanism of SiCp/Al composites

Study on the formation mechanism of surface defects in the processing of large particle SiCp/Al composites

Experiment Research on Cutting Performance of High Volume Fraction SiCp/Al Composites in Rotary Ultrasonic Machining

Microstructure evolution and ablation mechanism of SiCf/SiC ceramic matrix composite microgrooves processed by pico-second laser

Finite element and experimental analysis of surface integrity and surface roughness of precision machining SiCp/Al

Laser ablation behavior and mechanism of Cf/C–SiC composites under different laser energy densities

Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting

An Efficient High-Quality Cutting Method for Thick SiC f /SiC Ceramic Matrix Composites Using UV Laser Multiline Layered Scanning with Focus Increment Optimization

Removal mechanism of SiC/SiC composites by underwater femtosecond laser ablation

The Effects of Laser Parameters and the Ablation Mechanism in Laser Ablation of C/SiC Composite

Study on the High-Speed Milling Performance of High-Volume Fraction SiCp/Al Composites

Finite element analysis and experimental study on the cutting mechanism of SiCp/Al composite in laser ultrasonic elliptic vibration turning

Cutting performance and wear behavior of diamond, coated cemented carbide and PCBN tools during milling of C f /SiC composites

Effect of SiC/SiC composites density on nanosecond-laser machining behaviors

Simulation and Experimental Study of C/SiC Composites by Laser-ultrasonic Hybrid Micromachining

Experimental and FEM study of surface formation and deformation mechanism of SiCp/Al composites in laser-ultrasonic vibration assisted turning

Study on micro-grinding mechanism and surface quality of hardened 20 vol% SiCp/Al composites