Pulsed Laser Ultrasonic Vibration-Assisted Cutting of SiCp/Al Composites through Finite Element Simulation and Experimental Research

Weidong Zhou,Yan Gu,Jieqiong Lin,Qingsong Ye,Siyang Liu,Yuan Xi,Yinghuan Gao,Tianyu Gao,Guangyu Liang,Lue Xie
DOI: https://doi.org/10.3390/machines12010071
IF: 2.899
2024-01-18
Machines
Abstract:Silicon carbide particle-reinforced aluminum matrix composites (SiCp/Al) find diverse applications in engineering. Nevertheless, SiCp/Al exhibit limited machinability due to their special structure. A pulsed laser ultrasonic vibration assisted cutting (PLUVAC) method was proposed to enhance the machining characteristics of SiCp/Al and decrease surface defects. The finite element model was constructed, considering both the thermal effect of the pulsed laser and the location distribution of SiC particles. The model has been developed to analyze the damage forms of SiC particles and the formation mechanisms for the surface morphology. The influence of pulsed laser power on average cutting forces has also been analyzed. Research results indicate that PLUVAC accelerates the transition from the brittleness to the plastic of SiC particles, which helps to reduce surface scratching caused by fragmented SiC particles. Furthermore, the enhancement of surface quality is attributed to the decrease in surface cracks and the beneficial coating effect of the Al matrix. The accuracy of the simulation is verified by experiments, and the feasibility of PLUVAC method to enhance the surface quality of SiCp/Al is confirmed.
engineering, mechanical, electrical & electronic
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: how to improve the surface quality of silicon carbide particle - reinforced aluminum - based composites (SiCp/Al) during processing and reduce surface defects. Specifically, due to the special structure of SiCp/Al materials, traditional processing methods often lead to SiC particle fracture, fragmentation and pitting, and these defects will seriously affect the overall performance and stability of the workpiece. In order to overcome these problems, the paper proposes a pulsed - laser - ultrasonic - vibration - assisted cutting (PLUVAC) method, aiming to improve the machinability of SiCp/Al materials, reduce surface defects and thus improve the surface quality by combining pulsed - laser and ultrasonic - vibration technologies. ### Main research contents: 1. **Principles of the PLUVAC method**: - The pulsed laser is focused on the leading edge of the tool and moves synchronously with the two - dimensional ultrasonic vibration device. - The laser irradiates the surface of the workpiece, causing the material to absorb energy and the surface temperature to rise, thereby achieving surface modification. - The ultrasonic vibration makes the tool cut the irradiated area periodically, which helps to change the SiC phase removal from brittle to plastic, reduces the fragmentation of SiC particles, and prevents the fragmented SiC particles from entering the rear surface of the tool and causing secondary damage. 2. **Finite element simulation**: - A finite - element model considering the position distribution of SiC particles was constructed, and the damage forms of SiC particles and the formation mechanism of the surface topography were analyzed. - The effects of the PLUVAC and UVAC methods on SiC particle damage and surface topography were compared. 3. **Experimental research**: - Experimental research was carried out to explore the influence of process parameters on the surface roughness (Sa) and surface topography. - The influence of the pulsed - laser power on the average cutting force was analyzed. - The accuracy of the simulation model was verified by comparing the surface defects after UVAC and PLUVAC processing. ### Research results: - The PLUVAC method accelerates the transformation of SiC particles from brittle to plastic and reduces the surface scratches caused by the fragmentation of SiC particles. - The improvement of the surface quality is mainly attributed to the reduction of surface cracks and the beneficial coating effect of the Al matrix. - The experimental results verify the feasibility and effectiveness of the PLUVAC method in improving the surface quality of SiCp/Al materials.