Abstract:Cracking of pavement materials affects the service performance of pavement structures. It is widely investigated by discrete element method (DEM) because the DEM can present the cracking behavior and mechanism from the mecroscopic perspective. However, improper calibration method is time-consuming and the simulation results are not applicable for different loading conditions. To address this issue, a systematical calibration method is proposed to establish a more reasonable DEM model, and it is used to explore the cracking behavior and mechanism for pavement materials. The fiber reinforced cement treated aggregates (F-CTA) used to construct the pavement base are selected as an example to elaborate the process. First, contacts within the F-CTA were divided into five groups according to physical components. Then, laboratory tests were performed to obtain macro mechanical properties including strength and modulus. Next, the corresponding virtual tests were established and the contact model parameters were calibrated from mono-component to mixture. This calibration method was validated by the three-point bending test incorporating all contact parameters obtained from the above calibrations and the process of cracking evolution was analyzed. Results show that the simulated mechanical responses and crack distribution based on the systematical calibration are in good agreement with laboratory measurements and observations, exhibiting well reliability for calibrating contact parameters of composite material. Young's modulus of the F-CTA is sensitive to the mecro effective modulus in the virtual indirect tensile test while Young's modulus and tensile strength are vulnerable to the mecro cohesion in the virtual uniaxial compression test. The mortar-aggregate and mortar-aggregate interface is relatively weak where cracks are prone to appear. The fibers can optimize the distribution of the crack network. The cracking evolution contains three stages and the second stage has a significant influence on the cracking behavior of the F-CTA.

Mesoscale analysis of dry shrinkage fractures in concrete repair systems using FEM and VEM

A Dynamic FEM-DEM Multiscale Modeling Approach for Concrete Structures

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

MESOSCALE FRACTURE MODELING OF FOUR-PHASE CONCRETE USING A DEM-ENHANCED STRUCTURE GENERATION METHOD

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Drying shrinkage crack simulation and meso-scale model of concrete repair systems

Hybrid Phase-Field Modeling of Mesoscopic Failure in Concrete Combined with Fourier-Voronoi Stochastic Aggregate Distribution Modelling Approach

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Mesoscopic numerical test of crushing process of concrete under uniaxial compression

3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete

Two-Dimensional Meso-Scale Simulation of Hydraulic Fracture in Concrete

Numerical Study of Shrinkage Cracking in Concrete and Concrete Repair Systems

Numerical Analysis of Drying Shrinkage in Long Reinforced Concrete Structure

Simulation and analysis of infilled-wall cracks' development by shrinkage using semi-discrete and whole type model

THREE-DIMENSIONAL MESO-SCALE COHESIVE FRACTURE MODELING OF CONCRETE USING A PYTHON SCRIPT IN ABAQUS

An Efficient FE–SBFE Coupled Method for Mesoscale Cohesive Fracture Modelling of Concrete

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Mesoscopic Numerical Simulation of Fracture Process and Failure Mechanism of Concrete Based on Convex Aggregate Model

Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model

Fracture Simulation of Concrete Beams to assess softening behavior by varying different fractions of Aggregates

Interfacial debonding constitutive model and XFEM simulation for mesoscale concrete