Sandwiched structure design for perovskite solar cells with improved folding and environmental stability

Huang Lin,Renjie Miao,Haiqiao Wang,Huahang Lai,Weiyan Wang,Weijie Song

DOI: https://doi.org/10.1002/solr.202200814

IF: 9.1726

2022-11-07

Solar RRL

Abstract:Foldable perovskite solar cells (PSCs) have promising applications in self‐powered wearable and portable electronic devices. However, the folding stability requires further improvement through mitigating the strain in brittle layers under folding deformation. In this work, sandwich‐structured PSCs (SS‐PSCs) was constructed by coating protection layer at the back of device, to tune the neutral plane (NP) place into the brittle perovskite films. To accurately regulating the NP place, the effect of protective layer thickness on the strain distribution in PSCs under extreme folding radius was simulated. The SS‐PSCs were experimentally prepared using Al2O3/PET protection layer with optimum thickness, combined with ultrathin silver foldable electrodes. Benefitting from the water‐resisting Al2O3/PET, the SS‐PSCs demonstrated high environment stability which maintained 85.1% of original efficiency after 700 h in humidity of 50 ± 10%. More importantly, the SS‐PSCs exhibited excellent mechanical stability, which maintained >90% of the initial efficiency after bending with 4000 cycles at radius of 0.2 mm, and even 67.2% of the initial efficiency after 50 direct folding cycles, much better than that of the conventional PSCs without protection layer. As far as we known, it was one of the best mechanical stable devices. At last, the failure mechanism of PSCs under folding deformation was deeply analyzed based on the crack propagation behavior of perovskite films with applied strain. Our findings pave the way for realizing not only foldable PSCs but also other foldable optoelectronic devices, such as sensors and organic light emitting devices. This article is protected by copyright. All rights reserved.

energy & fuels,materials science, multidisciplinary