Abstract:Fault location is one of the main challenges in the distribution network due to its expanse and complexity. Today, with the advent of phasor measurement units (PMU), various techniques for fault location using these devices have been proposed. In this research, distribution network fault location is defined as an optimization problem, and the network fault location is determined by solving it. This is done by combining PMU data before and after the fault with the power system status estimation (PSSE) problem. Two new objective functions are designed to identify the faulty section and fault location based on calculating the voltage difference between the two ends of the grid lines. In the proposed algorithm, the purpose of combining the PMU in the PSSE problem is to estimate the voltage and current quantities at the branch point and the total network nodes after the fault occurs. Branch point quantities are calculated using the PMU and the governing equations of the π line model for each network section, and the faulty section is identified based on a comparison of the resulting values. The advantages of the proposed algorithm include simplicity, step-by-step implementation, efficiency in conditions of different branch specifications, application for various types of faults including short-circuit and series, and its optimal accuracy compared to other methods. Finally, the proposed algorithm has been implemented on the IEEE 123-node distribution feeder and its performance has been evaluated for changes in various factors including fault resistance, type of fault, angle of occurrence of a fault, uncertainty in loading states, and PMU measurement error. The results show the appropriate accuracy of the proposed algorithm showing that it was able to determine the location of the fault with a maximum error of 1.21% at a maximum time of 23.87 s.

Fault location using mathematical analysis and database approach

Distributed Fault Location Based on Comprehensive Analysis of Fault Current

Fault Location Method in Power Network by Applying Accurate Information of Arrival Time Differences of Modal Traveling Waves

Fault Location Analysis of Ungrounded Distribution System Based on Residual Voltage Distribution

Fault Location Method for Distribution Network Based on Synchronous Measurement

Fault Location Based on Synchronous Data of Both Ends in Non-effectively Grounded System

Fault Location in Distribution Network by Solving the Optimization Problem Based on Power System Status Estimation Using the PMU

Data-Driven Ground-Fault Location Method in Distribution Power System With Distributed Generation

Study onFault Location Method Based on Leakage Energy Function

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

Fault Location in Active Distribution Networks Using Block Sparse Bayesian Learning

Method and Simulation Analysis of Comprehensively Distributed Fault Location of Transmission Line

Fault Location Technology for Power System Based on Information About the Power Internet of Things

Fault Location Method for Distribution Networks Based on Leakage Energy Function

Current Sag and Mismatch Based Earth Fault Location for Distribution Network with Renewable Energy Resources

A Fault Location Method for Multi-branch Distribution Lines.

High Impedance Fault Detection and Location in Combined Overhead Line and Underground Cable Distribution Networks Equipped with Data Loggers

A Fault Location Method by Multi-point Monitoring for Distribution Network Based on HHT Transformation and Traveling Wave Theory

A Fault Location Algorithm for Multi-Section Combined Transmission Lines Considering Unsynchronized Sampling

A Hybrid Technique for Fault Classification and Location in a Jointed Overhead-Underground Distribution Line