Abstract:In view of the potential demand for the materials with excellent dynamic mechanical behavior in protective construction, the dynamic tensile mechanical properities and deformation mechanism of twinning-induced plasticity (TWIP) steel at various high strain rates were investigated in this paper by combining test research and numerical simulation. In order to explore the impact of strain rates on mechanical behaviors within the tested range, a split Hopkinson tensile bar (SHTB) was utilized to measure the mechanical responses of TWIP steel ranging from 1000 s -1 to 6500 s -1 . The Johnson-Cook (J-C) dynamic constitutive model was established based on the mechanical test results, and the mechanical properties were studied by using ANSYS/LS-DYNA. EBSD and TEM were employed to investigate the microstructure evolution of TWIP steel under dynamic loading. The results demonstrate that both strength and plasticity increase with increasing strain rate, demonstrating positive strain rate sensitivity (PSRS) which is primarily due to the activation of multiple twin systems at higher strain rates. As the strain rate increases, the mean free path of dislocation slip reduces, causing a higher strain hardening rate. The critical shear stress required for twinning is almost unchanged with an increase in strain rate, while the shear stress required for dislocation increases consistently. As the strain rate exceeds 3000 s -1 , the critical shear stress required for dislocation becomes greater than that for twinning. With increasing strain rate, the proportion of secondary twins in TWIP steel rises and the deformation twins are bent when the strain rate is 6500 s -1 owing to the effect of dislocations and stacking faults. The production of nanoscale twins at higher strain rates is a beneficial phenomenon, as it enhances both strength and plasticity. The deformation twins become thinner with an increase in strain rate, leading to a rise in the stress needed for the motion of dislocations to pass the twins, which contributes to the improvement of strength in TWIP steel. The slip systems that deforms at a disadvange have new orientations because of defromation twins. The established J-C model is appropriate well for analyzing the mechanical properties of TWIP steel in the tested range of strain rates accoring to the fingdings of test and numerical simulation. Establishing the connection of microstructure and macroscopic behavior of TWIP steel could provide a guidance for the its further study and the application in the fields of impact resistance and anti-explosion.

Significantly Enhanced Strength of a Drawn Twinning-Induced Plasticity Steel Wire and its Deformation Twinning Dependency

Effect of Plastic Deformation on Thermal Properties in Twinning-Induced Plasticity Steel

Comparison of Temperature Distribution between TWIP and Plain Carbon Steels during Wire Drawing

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel

Wire Drawing Behaviors with Die Angle and Strain Hardening Rate of a Metal

Strength and Strain-Hardening Enhancement by Generating Hard Delta-Ferrite in Twinning-Induced Plasticity Steel

The mechanism of twin thickening and the elastic strain state of TWIP steel nanotwins

Dynamic tensile behaviour of TWIP steel under intermediate strain rate loading

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

Investigation of Work Hardening Behavior in Multilayered Steels Architected by Twinning Induced Plasticity Steel and Martensitic Steel During Uniaxial Tension

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel

Improving Strength of Cold-Drawn Wire by Martensitic Transformation in a 0.65 Wt% C Low-Alloy Steel

Microstructure evolution of ultra-high-strength twinning-induced plasticity (TWIP) steel under dynamic loading

Revealing the grain size-dependent twinning variants and the associated strengthening mechanisms in a carbon-free austenitic steel

Analysis of TWIP Effect

Investigation of dynamic tensile mechanical responses and deformation mechanism at high strain rates in a TWIP steel

Evading the Strength–ductility Trade-off Dilemma in Steel Through Gradient Hierarchical Nanotwins

Machine-Learning-Assisted Composition Design for High-Yield-Strength TWIP Steel

Influence of Grain Size on Twip Effect in A Twip Steel