Abstract:In this dissertation, the relationships between structure-mechanical properties-deformation mechanisms in face-centered cubic (FCC) and body-centered cubic (BCC) metallic nanowires have been studied using in situ TEM nanomechanical testing. It is well known that smaller is stronger and the widely-observed size effect is believed to arise from dislocation interactions inside nanocrystals. However, the interaction mechanisms in small-volume nanocrystals remain unexplored. Here, it was found that surface-nucleated dislocations can strongly interact inside the confined volume of Au nanowires, which led to a new type of dislocation-originated stacking fault tetrahedra (SFT), at variance to the widely-believed vacancy-originated SFT. The atomic-scale processes of nucleation, migration and annihilation of dislocation-originated SFT were revealed, shedding new light onto the strain hardening and size effect in small-volume materials. Although nanoscale twinning is an effective mean to enhance the strength of metals, twin-size effect on the deformation and failure of nanotwinned metals remains largely unexplored, especially at the minimum twin size. Here, a new type of size effect in nanotwinned Au nanowires is presented. As twin size reaches the angstrom-scale, Au nanowires exhibit a remarkable ductile-to-brittle transition that is governed by the heterogeneous-to-homogeneous dislocation nucleation transition. Quantitative measurements show that approaching such a nanotwin size limit gives rise to the ultra-high strength in Au nanowires, close to the ideal strength limit of perfect Au. Twinning is a fundamental deformation mode that competes against dislocation slip in crystals. At the nanoscale, higher stresses are required for plastic deformation than that in bulk, which favors twinning over dislocation slip. Indeed, deformation twinning has been well-documented in FCC nanocrystals. However, it remains unexplored in BCC nanostructures. Here, it shows that twinning is the dominant deformation mode in BCC-tungsten nanocrystals. A competition between twinning and dislocation slip occurs when changing the loading orientations, attributed to the defect growth controlled plasticity in BCC nanocrystals. Several important commonalities and differences in FCC and BCC nanocrystals deforming at nanoscale are further proposed. The results from this dissertation advance fundamental understanding of plastic deformation in a broad class of metals and alloys, and are of technological importance for degradation control and future design of ultra-strength nanomaterials.

In-situ TEM investigation of deformation mechanisms of twinning-induced plasticity steel

Transmission electron microscopy observation of a deformation twin in TWIP steel by an ex situ tensile test

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

Cross-slip of extended dislocations and secondary deformation twinning in a high-Mn TWIP steel

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

Atomistic Simulation for Deforming Complex Alloys with Application Toward TWIP Steel and Associated Physical Insights

Dislocation Plasticity Reigns in a Traditional Twinning-Induced Plasticity Steel by in Situ Observation

The mechanism of twin thickening and the elastic strain state of TWIP steel nanotwins

Atomic-scale Understanding of Twin Intersection Rotation and Ε-Martensite Transformation in a High Mn Twinning-Induced Plasticity Steel

Study of dislocation-twin boundary interaction mechanisms in plastic deformation of TWIP steel by discrete dislocation dynamics and dislocation density-based modeling

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

Distribution of dislocation-twin interaction in TWIP steel under different loading modes

Microstructure evolution and fracture behaviour of TWIP steel under dynamic loading

Effects of Twin-Dislocation and Twin-Twin Interactions on the Strain Hardening Behavior of TWIP Steels

Investigation of dynamic tensile mechanical responses and deformation mechanism at high strain rates in a TWIP steel

Investigating the dislocation reactions on Σ3{111} twin boundary during deformation twin nucleation process in an ultrafine-grained high-manganese steel

Microstructure evolution of ultra-high-strength twinning-induced plasticity (TWIP) steel under dynamic loading

Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel

4D-STEM elastic stress state characterisation of a TWIP steel nanotwin

Hot Deformation Behavior and Dynamic Recrystallization Mechanism of Fe-18.2Mn-0.52C Twinning-Induced Plasticity Steel

Delving into the intrinsic co-relation between microstructure and mechanical behaviour of fine−/ultrafine-grained TWIP steels via TEM and in-situ EBSD observation