Abstract:The intersection of dynamic compression, high-rate material response and X-ray science has seen rapid growth, leading to the establishment of specialized end-stations at international facilities such as Linac Coherent Light Source LCLS (Matter at Extreme Conditions – MEC) and Advanced Photon Source APS (Dynamic Compression Sector – DCS), both USA. Although these facilities excel in working with X-rays tailored for small material volumes ( i.e. <1mm3 ), it needs a different approach to delve into subsequent processes. This is particularly the case in the transition from the micro- to mesoscale: here the ESRF distinguishes itself. The large beam size (several cm 2 ) of the ID19 beamline, in conjunction with a strong high energy component, source flux density, and outstanding imaging sensitivity, enables sub-surface visualization of engineering-scale structures as well as natural systems in representative volume, under high rate and shock. This is particularly valuable when studying materials with complex mesostructures and heterogeneities on relevant volumetric scales, which often dominate the dynamic material response. The study of the behavior of materials under dynamic loading presents a unique challenge due to inherently spanning over multiple lengths- and timescales. The evolution of sudden (thermo)mechanical excitation, starting from the lattice scale and progressing through grains, phase domains, and ultimately to structures, exhibits a spectrum of responses spanning from the microscopic to bulk length scales. Consequently, a diverse range of diagnostics as well as driver instrumentation is required to identify, study, and characterize this material response spectrum. This article shall introduce platforms available at beamline ID19 and underline their potential by selected showcase applications. Community access proposals such as the beamtime Block Allocation Group (BAG) allow for access in a routine manner.

In-situ radiography of a split-Hopkinson bar dynamically loaded materials

Development of Structural Testing Equipment for Impact and Complex Loading

Beyond Hopkinson's bar

Design and Calibration of a Large-Scale 155-mm Split-Hopkinson Pressure Bar

Design, development, and calibration of split Hopkinson pressure bar system for Dynamic material characterization of concrete

Dynamic loading platforms coupled to ultra-high speed X-ray imaging at beamline ID19 of the European Synchrotron ESRF

Design of an Innovative System for Wave Generation in Direct Tension–Compression Split Hopkinson Bar

Development of Tensile Split Hopkinson Pressure Bar Technique for Studying the Dynamic Behaviour of Metals

A Novel Integrated Tension-Compression Design for A Mini Split Hopkinson Bar Apparatus

Hopkinson bar experiments as a method to determine impact properties of brittle and ductile materials

A new split Hopkinson tensile bar design

Material behaviour characterisation using SHPB techniques, tests and simulations

Device and method for investigation of mechanical properties of the materials under high-strain rate tensile load

Development of a laser-driven shock compression platform for time-resolved XRD experiments at the ID09 beamline of the European Synchrotron Radiation Facility

A Review of the Torsional Split Hopkinson Bar

Gas gun shock experiments with single-pulse x-ray phase contrast imaging and diffraction at the Advanced Photon Source

Development and Validation of a Hopkinson Bar for Hazardous Materials

Dynamic shear response of a polymer bonded explosive using a modified Hopkinson bar apparatus

Experimental Technique of High Strain-Rate Tension Based on Hopkinson Bar

Simultaneous Multiscale Measurements on Dynamic Deformation of a Magnesium Alloy with Synchrotron X-Ray Imaging and Diffraction