Abstract:Lithium cobalt oxide (LiCoO2, LCO) has been widely used in electronic markets due to its high energy density and wide voltage range applications. Recently, high-voltage (HV, >4.5 V) operation has been required to obey the requirements of high energy density and cycle life in several applications such as electric vehicles and energy storage. However, the HV operation causes structure instability due to the over de-lithiation of LCO, as well as decomposing common carbonate solvents, thereby incurring the decay of battery performance. Moreover, a distortion of the CoO6 octahedra of LCO during de-lithiation induces a rehybridization of the Co 3d and O 2p orbitals. According to above reasons, decreasing the Co-O covalent bond promptly triggers high risks that significantly limit further use of LCO. In this research, an organic surface reinforcement by using bismaleimide–uracil (BU) that electrochemically forms a cathode electrolyte interphase (CEI) on LCO was explored. The results of electrochemical impedance spectroscopy and battery performance, such as the c-rate and cyclability tests, demonstrated that the modified CEI formed from BU significantly prevents the distortion of CoO6 octahedra. X-ray photoelectronic spectroscopy and in situ XAS indicated less LiF formation and higher bond energy of Co-O improved. Finally, the differential scanning calorimetry showed the onset temperature of decomposition of LCO was extended from 245 to 270 °C at 100% state of charge, which is about a 25 °C extension. The exothermic heat of LCO decreased by approximately 30% for high-safety use. This research confirms that the BU is eligible for high voltage (>4.5 V) LCO and presents outstanding electrochemical properties and safety performances.

Progress and perspective of high-voltage lithium cobalt oxide in lithium-ion batteries

Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries

Realizing High Voltage Lithium Cobalt Oxide in Lithium-ion Batteries

Engineering Strategies for High‐voltage LiCoO2 Based High‐energy Li‐ion Batteries

High-voltage LiCoO2 cathodes for high-energy-density lithium-ion battery

Advancing to 4.6 V Review and Prospect in Developing High‐Energy‐Density LiCoO 2 Cathode for Lithium‐Ion Batteries

Ultrahigh‐voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification

Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries

Critical Problems and Modification Strategies of Realizing High‐Voltage LiCoO2 Cathode from Electrolyte Engineering

Structural Understanding for High‐Voltage Stabilization of Lithium Cobalt Oxide

Revealing the correlation between structure evolution and electrochemical performance of high-voltage lithium cobalt oxide

Interplay between multiple doping elements in high-voltage LiCoO<sub>2</sub>

Structural origin of the high-voltage instability of lithium cobalt oxide

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Revealing the Grain-Boundary-Cracking Induced Capacity Decay of a High-Voltage LiCoO2 at 4.6 V.

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Ultrahigh-Voltage LiCoO 2 at 4.7 V by Interface Stabilization and Band Structure Modification.

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Preventing the Distortion of CoO6 Octahedra of LiCoO2 at High-Voltage Operation of Lithium-Ion Battery: An Organic Surface Reinforcement