Abstract:Charging lithium cobalt oxide (LCO) cathodes to high voltage results in a significant increase in the battery's energy density, however, leads to its fast failure due to irreversible side reactions. The combination of fluorinated electrolytes solutions with a Li–Al–F surface coating effectively stabilizes both the cathode and the anode, hence enhancing the long‐term performance of 4.6 V LCO cells. The need for high power density cathodes for Li‐ion batteries can be fulfilled by application of a high charging voltage above 4.5 V. As lithium cobalt oxide (LCO) remains a dominant commercial cathode material, tremendous efforts are invested to increase its charging potential toward 4.6 V. Yet, the long‐term performance of high voltage LCO cathodes still remains poor. Here, an integrated approach combining the application of an aluminum fluoride coating and the use of electrolyte solutions comprising 1:1:8 mixtures of difluoroethylene:fluoroethylene carbonate:dimethyl carbonate and 1 m LiPF6 is reported. This results in superior behavior of LCO cathodes charged at 4.6 V with high initial capacity of 223 mAh g−1, excellent long‐term performance, and 78% capacity retention after 500 cycles. Impressive stability is also found at 450 °C with an initial capacity of 220 mAh g−1 and around 84% capacity retention after 100 cycles. Systematic post‐mortem analysis of LCO cathodes and Li anodes after prolonged cycling reveals two main degradation routes related to changes at the surface of the cathodes and formation of passivation layers on the anodes. This study demonstrates the importance of appropriate selection of electrolyte solutions and development of effective coatings for improved performance of high voltage LCO‐based Li batteries.

High-voltage LiCoO2 cathodes for high-energy-density lithium-ion battery

Engineering Strategies for High‐voltage LiCoO2 Based High‐energy Li‐ion Batteries

Progress and perspective of high-voltage lithium cobalt oxide in lithium-ion batteries

Realizing High Voltage Lithium Cobalt Oxide in Lithium-ion Batteries

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection

Understanding Co roles towards developing Li-rich layered oxide cathodes for lithium-ion batteries

Structural origin of the high-voltage instability of lithium cobalt oxide

Interplay between multiple doping elements in high-voltage LiCoO<sub>2</sub>

Critical Problems and Modification Strategies of Realizing High‐Voltage LiCoO2 Cathode from Electrolyte Engineering

High cyclability of LiCoO2 at high-voltage enabled by mixed ion and electron conductor Li7.5La3Zr1.5Co0.5O12 shell

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Advancing to 4.6 V Review and Prospect in Developing High‐Energy‐Density LiCoO 2 Cathode for Lithium‐Ion Batteries

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage