Abstract:Equiatomic AlCoCrFeMoW and AlCoCrFeMoV HEA compositions were fabricated using a cost-effective flame spraying technology. The microstructure, phases, average microhardness, and nano hardness of the fabricated HEA coatings were systematically investigated, in order to assess their resistance to dry abrasive wear (ASTM G65 Standard) and solid-particle erosion (ASTM G76 Standard). Furthermore, linear regression analysis was performed to assess the relationship between the variables based on microhardness, hardness to elastic modulus ( H/E ) ratio, and strain hardening coefficient ( α ) were explored in order to describe the coating's performance under abrasive wear and solid particle erosion. The results showed the formation of BCC1 and BCC2 phases coupled with mixed oxide inclusions for the AlCoCrFeMoW HEA coatings, whilst FCC and spinel-type oxides were observed in the AlCoCrFeMoV HEA coatings. Owing to differences in phase formations, the average microhardness as well as the average nanohardness were 18% and 46% higher, respectively, for the AlCoCrFeMoV HEA coatings than those of the AlCoCrFeMoW HEA coatings. Performance assessment under dry abrasive wear indicated that lower wear rates (210 × 10 −6 mm 3 /Nm) were achieved for the AlCoCrFeMoV HEA coatings, which showed moderate to strong correlation with microhardness and strain hardening coefficient. In terms of solid particle erosion, lower erosion rates (i.e., 0.51 mm 3 /g for 30 0 and 0.65 mm 3 /g for 90 0 ) were achieved for the AlCoCrFeMo HEA coatings, followed by AlCoCrFeMoW and AlCoCrFeMoV HEA coatings, which are in good agreement with the H/E values. These results indicate the efficacy of flame-sprayed HEA coatings under demanding environments, which can be potentially transformative for addressing different tribological features for industrial component protection.

Influence of Plasma Arc Current on the Friction and Wear Properties of CoCrFeNiMn High Entropy Alloy Coatings Prepared on CGI through Plasma Transfer Arc Cladding

Sliding Wear of Spark Plasma Sintered CrFeCoNiCu High-Entropy Alloy Coatings: Effect of Aluminum Addition

Microstructure and Tribological Properties of FeCoCrNi High-Entropy Alloy Coatings Fabricated by Atmospheric Plasma Spraying

Frictional Wear and Corrosion Behavior of AlCoCrFeNi High-Entropy Alloy Coatings Synthesized by Atmospheric Plasma Spraying

Friction and Wear Properties of CoCrFeNiMnSnx High Entropy Alloy Coatings Prepared via Laser Cladding

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance

Microstructure and Properties of FeCrMnxAlCu High-Entropy Alloys and Coatings

Corrosion Resistance of CoCrFeNiMn High Entropy Alloy Coating Prepared through Plasma Transfer Arc Claddings

Effect of Welding Current on Wear Behavior of PTA-Welded Cu35Ni25Co25Cr15 HEA Coating

Microstructure evolution and properties of Fe-Ni-Cr-Co-Mo-W high-entropy alloy coatings by plasma surface alloying technology

Effect of Microstructure on Wear and Corrosion Performance of Thermally Sprayed AlCoCrFeMo High‐Entropy Alloy Coatings

Microstructure and Wear Behavior of CoCrFeMnNbNi High-Entropy Alloy Coating by TIG Cladding

Microstructural Properties and Wear Resistance of Fe-Cr-Co-Ni-Mo-Based High Entropy Alloy Coatings Deposited with Different Coating Techniques

Microstructural and Tribological Behavior of Thermal Spray CrMnFeCoNi High Entropy Alloy Coatings

Subsonic-Flame-Sprayed CoCrFeNi, AlCoCrFeNi and MnCoCrFeNi-Based High-Entropy Alloy Coatings and Their Tribological Behaviors

Effect of tungsten and vanadium additions on the dry abrasive wear and solid particle erosion of flame-sprayed AlCoCrFeMo high entropy alloy coatings

Corrosion resistance and wear behavior of CoCrFeNiMn@Gr high entropy alloy-based composite coatings prepared by laser cladding

Effect of Nanostructure on Wear and Corrosion Behavior of HVAF-Sprayed Eutectic High-Entropy Alloy Coatings

High-entropy alloy coatings with excellent mechanical, corrosion resistance and magnetic properties prepared by mechanical alloying and hot pressing sintering

Microstructure and Properties of CoCrFeNi(WC) High-Entropy Alloy Coatings Prepared Using Mechanical Alloying and Hot Pressing Sintering