Abstract:The metastable dual phase FeMnCoCr high entropy alloy (HEA) has attracted great attention since it was first proposed, as it can overcome the strength-ductility trade-off at room temperature. For materials in engineering applications, it is also important to achieve high corrosion resistance while maintaining good mechanical properties. In this study, we simultaneously improved the mechanical properties and corrosion resistance of a FeMnCoCr-based HEA via Cu alloying and by applying a simple processing route that combined cold rolling and partial recrystallization annealing. The alloy doped with 0.3 at.% Cu and processed by annealing at 650 °C for 3 min exhibited the best combination of strength and ductility, i.e., yield strength of 768 MPa, tensile strength of 960 MPa and uniform elongation of 33.6%. The high yield strength majorly originated from high density dislocations and grain boundaries in the material, while the formation of deformation twins, martensite laths, stacking faults and Lomer Cottrell locks contributed to the continuous strain hardening and good ductility. The addition of Cu also enhanced corrosion resistance of the HEA in a NaCl solution by improving stability of the alloy matrix and elevating compactness of the passive film. The solid solution of Cu elevated equilibrium potential of the matrix and promotes transformation of microstructure from the face-centered cubic (fcc) plus hexagonal close-packed (hcp) dual phases to the fcc single phase, effectively inhibiting the accelerated corrosion of micro galvanic couple between different phases and enhancing stability of the matrix. At the same time, the enrichment of CuO in the inner layer of the passive film reduced the defect density within the Fe-rich oxide layer, improving the protection of the passive film against the matrix.

High-entropy alloy coatings with excellent mechanical, corrosion resistance and magnetic properties prepared by mechanical alloying and hot pressing sintering

Effect of Submicron SiC Particles on the Properties of Alcocrfeni High Entropy Alloy Coatings

Microstructure and Properties of CoCrFeNi(WC) High-Entropy Alloy Coatings Prepared Using Mechanical Alloying and Hot Pressing Sintering

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Microstructure and properties of CoCrFeNiCu high-entropy alloy coating prepared by induction cladding

MICROSTRUCTURE AND PROPERTIES OF COATING OF AlFeCrNiMo HIGH-ENTROPY ALLOY

Microstructure and Properties of FeCrMnxAlCu High-Entropy Alloys and Coatings

Microstructures and properties of FeCoNiCr high-entropy alloy coatings prepared by electrodeposition

Microstructure evolution and properties of Fe-Ni-Cr-Co-Mo-W high-entropy alloy coatings by plasma surface alloying technology

Structure and corrosion behavior of FeCoCrNiMo high-entropy alloy coatings prepared by mechanical alloying and plasma spraying

Preparation of CrCoFeNiMn High-Entropy Alloy Coatings Using Gas Atomization and Laser Cladding: An Investigation of Microstructure, Mechanical Properties, and Wear Resistance

AlxCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Microstructures and properties of Fe1.25CoNi1.25CrxAl0.25 high-entropy alloys after cold-rolling and annealing

Friction and Wear Properties of CoCrFeNiMnSnx High Entropy Alloy Coatings Prepared via Laser Cladding

FeNiCrCoCuxMo High Entropy Alloy (HEA) Coatings Fabricated by Laser Cladding

Microstructure and corrosion properties of AlCr NiCu0.5Mo (x = 0, 0.5, 1.0, 1.5, 2.0) high entropy alloy coatings on Q235 steel by electrospark – Computer numerical control deposition

Effect of Cu on microstructure and properties of Co 2 CrFeNiMnCu x high-entropy alloy coatings prepared by laser cladding

Microstructure and Corrosion Properties of Electrodeposited CoCrFeMnNi High Entropy Alloy Coatings

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Cu alloying enables superior strength-ductility combination and high corrosion resistance of FeMnCoCr high entropy alloy