Abstract:In mobile devices such as aircraft and electric vehicles, due to limited space, there are strict requirements on the volume and weight of the compressor mounted on the vehicle. Therefore, high-speed scroll compressors have attracted more and more attention because of their small size and light weight. In this paper, the numerical calculations and analysis of the three-dimensional (3D) transient flows in a high-speed scroll refrigeration compressor were established and validated. Circumferential gas intake was used in the simulation. According to the actual compressor size, the mesh generation accurately considers clearances. The radial and the axial clearances were both set as 0.01 mm. A dynamic and high-quality hexahedral structured mesh was generated for the working chamber, and the problem of insufficient grid density in radial clearance was solved. When the rotational speed was set as 3000 rpm, 6000 rpm, and 9000 rpm alternatively, the difference in the volume efficiency of the simulation and the experiment results was below 6.3%. The results show that the higher rotational speed contributed to the greater pressure fluctuation in the compression chamber and the discharge process, and the over-compression phenomenon was more obvious. The maximum leakage velocity was 160 m/s, and the tangential leakage velocity was higher than the radial leakage velocity. Meanwhile, radial leakage velocity will increase significantly in high-speed operation mode. With the increasing rotational speed, the position of the maximum axial and tangential leakage velocity was closer to the start of the scroll. Therefore, the seal of the scroll starting part is very important in the design of a high-speed scroll compressor.

Study on a variable wall thickness profile of electric scroll compressor used for automobile air conditioner

Modeling and analysis of a novel CPSC/CI combined profile for scroll compressors

Research on the Flow Path Design Method of Axial Flow Compressor of Gas Turbine

An Improved Geometric Theoretical Model and Throughflow Prediction Method for a CO2 Scroll Compressor of Automotive Air Conditioning System

Unsteady Characteristic and Flow Mechanism of a Scroll Compressor with Novel Discharge Port for Electric Vehicle Air Conditioning

Geometric model and pressurization analysis on a novel sliding vane compressor with an asymmetrical cylinder profile

Investigation of the unsteady characteristic in a scroll compressor of a heat pump system for electric vehicles

Transient flow and thermodynamics analysis of a scroll compressor based on CFD

Construction and simulation of novel asymmetrical scroll wraps for scroll vacuum pumps

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Analysis of 3D Transient Flow in a High-Speed Scroll Refrigeration Compressor

A General Geometrical Model of Scroll Compressors Based on Discretional Initial Angles of Involute

Study and Application of the Designing Theory of the Vane Profile for Any Rotary Vane Compressor

Investigation on the modifications of the suction flow passage in a scroll refrigeration compressor

Experimental investigation on the characteristics of variable displacement swash plate compressor

Characterization of a Scroll-Type Compressor for Driving JT Cryocoolers Working at Liquid Helium Temperature

Experimental investigation and numerical simulation on the hysteresis zone of a variable displacement wobble plate compressor

Analysis of the transient flow in a scroll-type compressor constructed from an algebraic spiral with pressure relief valves

Thermodynamics and flow unsteadiness analysis of trans-critical CO2 in a scroll compressor for mobile heat pump air-conditioning system

Thermal Analysis Model of Scroll Compressor with Clearance Leakage Based on Multiple Scale Method

Design improvement for suction shape in rotary compressor