Improving the small ball-end magnetorheological polishing efficiency of fused silica workpiece by the promoting effect of water-bath heating and sodium hydroxide addition on polishing velocity and chemical reaction

DOI: https://doi.org/10.1007/s00170-022-10180-9

2022-10-05

Abstract:Small fused silica components with complex structure, such as hemispherical shell resonator in inertial navigation system, are the core components of the equipment in precision optics, aerospace, and other fields. Due to the hard and brittle characteristics of fused silica, these components easily form surface defects in grinding process. This restricts the improvement of equipment performance. The small ball-end permanent-magnet magnetorheological polishing can remove the surface defects of these workpieces. However, due to the high hardness of fused silica, the material removal rate in the polishing process is low. This makes it difficult to increase production and reduce costs. In this research, a method to improve the polishing efficiency by the promoting effect of water-bath heating and NaOH addition on polishing velocity and chemical reaction is proposed. The promotion mechanism is studied. It is found that adding NaOH to magnetorheological fluid can not only promote the chemical removal of fused silica by abrasive particles, but also soften the surface and subsurface of workpiece through chemical reaction to improve the mechanical removal of abrasive particles. Meanwhile, adding NaOH can reduce the zero-field viscosity of magnetorheological fluid. This can increase the polishing velocity of abrasive particles and the number of abrasive particles participating in material removal per unit time. Moreover, increasing the temperature of alkaline magnetorheological fluid by water-bath heating can not only improve the chemical reaction rate to generate more reaction product per unit time, but also further reduce the zero-field viscosity of magnetorheological fluid to increase the polishing velocity. The experimental result shows that when the magnetorheological fluid temperature is 60 °C and the pH value is 14, the material removal rate can be increased by 287%, and the polished surface roughness Sa can be reduced from 208.4 to 12.3 nm.

engineering, manufacturing,automation & control systems