Abstract:In the frame of the RETALT (RETro propulsion Assisted Landing Technologies) project, the aerodynamics of reusable launch vehicles reentering the atmosphere and descending and landing with the aid of retro propulsion are studied. In particular, series of wind tunnel tests are performed to assess the aerodynamic properties of such a vehicle in the various flight phases from hypersonic and supersonic re-entry down to subsonic conditions at touch down. This paper discusses the results of wind tunnel tests in the Hypersonic Wind Tunnel Cologne (H2K) at the Supersonic and Hypersonic Flow Technologies Department of the German Aerospace Center (DLR) in Cologne for the hypersonic retro propulsion maneuver during the re-entry burn. Mach numbers of 5.3 and 7.0 were tested with a variation of thrust coefficient, Reynolds number, angle of attack, cold and heated air. A single-engine configuration and a configuration with three active engines were tested. In all tests, the engine exhaust was simulated using ambient temperature or heated air. Dependencies of the flow features of the square root of the thrust coefficient known from literature for the single-engine case can be confirmed and extended to the three-engine configuration. For the single-engine case, the formation of vortex rings was observed, which eventually leads to strong individual vortices and extensive flow field disturbances. The heating of the supply air up to 600 K mitigates condensation in the retro plume, while the overall flow structures remained unchanged. High thrust coefficients generally lead to vanishing pressure coefficients on the engine bay. The single and the three-engine cases are comparable in this sense. The Mach number and Reynolds number are of subordinate importance for the pressures on the vehicle, while the thrust coefficient is the dominating similarity parameter. Pressure coefficients far downstream of the retro plume are affected less and, therefore, are not negligible at non-zero angles of attack. In this paper, the methodology of the wind tunnel tests and the results obtained are described in detail.

Numerical Study on the Thermal Loads During a Supersonic Rocket Retropropulsion Maneuver

Numerical Simulation of Sloshing in the Propellant Tank of Reusable Rocket Vehicle Using Meshfree Method

Numerical Investigation of Gas Models for Retropropulsion Flows for Future Mars Missions

Numerical simulation research of high altitude reverse jet flow for stage separation of missile

Re-entry rocket basic flow characteristics and thermal environment of different retro-propulsion modes

Aerothermal databases and load predictions for Retro Propulsion-Assisted Launch Vehicles (RETALT)

Aerodynamic characteristics of the retro propulsion landing burn of vertically landing launchers

Wind tunnel experiments of interstage segments used for aerodynamic control of retro-propulsion assisted landing vehicles

Hypersonic retro propulsion for reusable launch vehicles tested in the H2K wind tunnel

Thermal Performance Characteristics of an 80-Ton Variable-Thrust Liquid Engine for Reusable Launch Rockets

Numerical study of the separation of a turbulent boundary in rocket engine nozzles with an optimized supersonic part

Overview of system study on recovery methods for reusable first stages of future European launchers

Turbopump Parametric Modelling and Reliability Assessment for Reusable Rocket Engine Applications

Numerical Simulation of the Stress-Strain State of the Rocket Retention Module

Numerical Simulation Coupling on Fluid Flow and Heat Transfer in Nozzle and Equipment Cabin of Solid Rocket Motor during Operation Process

Preliminary aerodynamic design of a reusable booster flight experiment

Mission design for point-to-point passenger transport with reusable launch vehicles

Numerical Study on the Influence of Separation Time Sequence on the Initial Thermal Separation

Multidisciplinary Design Optimization of Reusable Launch Vehicles for Different Propellants and Objectives

Numerical Simulation of the Temperature Distribution in the Turbo-Pump System of a Rocket Engine During Gliding

Design of the landing guidance for the retro-propulsive vertical landing of a reusable rocket stage