Abstract:The advantages of cellulose and its derivatives as the latest materials for devices that generate, store, and convert electricity are their low cost, environmental friendliness, ease of recycling and the ability to be manufactured in various ways and from various raw materials, including agricultural waste. This predetermines the relevance of their study as materials for modern technology and electronics. The research aims to determine the luminescent characteristics of composite films made based on nanocellulose and polycrystalline oxide K3Tb0.9Eu0.1(PO4)2. Optical microscopy and the spectral-luminescence method were used to characterise the films and their initial components. It was found that crystallites with an average size of about 50mm are distributed quite evenly in the film “nanocellulose+K3Tb0.9Eu0.1(PO4)2”. A Raman scattering band with a maximum of 564 nm under laser excitation at 473 nm was observed for the investigated samples in the form of suspensions. The intensity of photoluminescence of nanocellulose in suspension and films is low compared to the luminescence of oxide as a filler. The luminescence of Eu3+ ions is intense in the red region of the spectrum. The calculated values of the degree of asymmetry indicate low symmetry of the positions occupied by europium ions in the oxide and the contribution of Tb3+ ion emission to the overall spectrum of the composite film. The study results show that the luminescence of Eu3+ ions is sensitised by Tb3+ ions, which absorb the excitation light and then transfer energy to europium ions. The position of the absorption bands of Eu3+ and Tb3+ ions in the ultraviolet region of the spectrum and the intense emission of Eu3+ in the red region indicates the prospects of using nanocellulose+ K3Tb0.9Eu0.1(PO4)2 films to improve the efficiency of solar panels. Testing of the films under the excitation of luminescence by ultraviolet radiation of an LED (λex=375 nm) showed the possibility of developing white LEDs on their basis. In particular, the chromaticity coordinates of the uncoated LED were (x=0.214; y=0.079), and the use of a film composite as a coating causes a shift in the coordinates to the red region: x=0.304, y=0.196. The obtained results on the morphology and luminescent properties can be used to optimise the composition and manufacturing conditions of composite films of the following types “nanocellulose+K3Tb0.9Eu0.1(PO4)2” for use as fluorescent converters in LEDs or solar panels

Luminescent Composites Based on Tetrafluoroethylene Copolymer Porous Films Produced by the Diffusion Embedding of Semiconductor Nanoparticles in a Supercritical Medium

Polymer-Derived Carbon Nanofiber and Its Photocurrent-Switching Responses of Carbon Nanofiber/Cu Nanocomposite in Wide Ranges of Excited Light Wavelength

Magnetic and Thermosensitive Luminescent Nanocomposites Based on Fe3O4/SiO2/poly (N-Isopropylacrylamide)/lanthanide-polyoxometalates and Their Controllable Luminescence Properties

Strongly Luminescent Composites Based on Carbon Dots Embedded in a Nanoporous Silicate Glass

Photoluminescent nanoparticles in water with tunable emission for coating and ink-jet printing

Temperature/pH Dual-Responsive Poly (N-Isopropylacrylamide)/chitosancoated Luminescent Composite Nanospheres: Fabrication and Controllable Luminescence

White Light Emission of Multi-Chromophore Photoluminescent Nanoparticles Using Polyacrylate Scaffold Copolymers with Pendent Polyfluorene Groups

Luminescence Studies of Electrospun Core–sheath Fibers with the Core Component Being a Rubber Nanocomposite Containing a Eu(iii) Complex

A Facile Approach to the Hydrothermal Synthesis of Silica Nanoparticle/Carbon Nanostructure Luminescent Composites

Luminescent converters based on nanocellulose + K3Tb(PO4)2:Eu composite films

Studying the Spectral Properties of Luminescent Polymer Composites Doped with Boron Difluoride Curcuminoids

Improved Mechanical, Anti-UV Irradiation, and Imparted Luminescence Properties of Cyanate Ester Resin/Unzipped Multiwalled Carbon Nanotubes/Europium Nanocomposites

Preparation and luminescent properties of inorganic/polymer nano-structured hybrid films doped with rare earth complexes

Fabrication and properties of luminescence polymer composites with erbium/ytterbium oxides and gold nanoparticles

Fabrication, Morphologies and Properties of Luminescent PMMA Porous Nano-Fibers

Luminescent Polyacrylonitrile(PAN) Electrospinning Nanofibers Encapsulating Silica nanoparticles carried Ternary Europium Complex

Luminescent Film With Terbium-Complex-Bridged Polysilsesquioxanes

Luminescence of Binary-Doped Silica Aerogel Powders: A Two-Step Sol-Gel Approach

Fabrication and characterization of dual-functional ultrafine composite fibers with phase-change energy storage and luminescence properties

Facile Synthesis Of Fluorescent Silica-Doped Polyvinylpyrrolidone Composites: From Cross-Linked Composite Film To Core-Shell Nanoparticles

Carbon Dot/polyvinylpyrrolidone Hybrid Nanofibers with Efficient Solid-State Photoluminescence Constructed Using an Electrospinning Technique