Abstract:The deformation behavior and microstructure evolution of a novel Mn-containing HEA were explored during the deformation temperature ranges of 800∼1100 °C, and strain rate ranges of 0.001∼1s −1 . The study results indicate that the true stress-strain curves after work hardening exhibit continuous softening type at low strain rate ranges of 0.001–0.01 s −1 , while softening then steady-state type at high strain rate ranges of 0.1∼1s −1 , respectively. The activation energy (Q) and stress exponent (n) are calculated to as 404.6 kJ/mol and 4.9016, respectively. As the strain increases, the flow instability is prone to expand towards the regions of lower strain rate and higher deformation temperature, and the optical processing window is determined at 1050–1100 °C and 0.001–0.002 s −1 . The strain and stress field distribution of the FEM simulations reveal the inhomogeneous deformation and the damage field distribution predict the crack region of deformation specimen. The critical (ε c )/peak strain (ε p ) for DRX do not display a proportional relationship with strain rate and an inversely proportional relationship with deformation temperature, and the relationship between ε c and ε p can be expressed as: ε c = (0.3–0.5) ε p . Only the discontinuous dynamic recrystallization (DDRX) mechanism is activated in the whole range of deformation conditions, but it is not fully carried out. Because of the inhomogeneous stress distribution, the dynamic recrystallized grains show bimodal grain size. Furthermore, the recrystallized grains do not grow significantly due to the synergistic contribution of sluggish diffusion effect, high solution hardening effect and the trimodal B2 precipitate phase distribution.

Study of work-hardening behavior of high manganese steel during compression

Work Hardening of High Manganese Steel

Microstructure evolution dependence of work-hardening characteristic in cold deformation of a difficult-to-deform nickel-based superalloy

Strengthening contributions of mechanical twinning and dislocations to the flow stress of 1.1C-12.5Mn steel at a strain rate of unity per second: Quantitative analysis

Effect of High-Temperature Deformation Twinning on the Work Hardening Behavior of Fe-38Mn Alloy during Hot Shear-Compression Deformation

Deformation Behavior and Microstructure of Low Carbon High Manganese Steels in Tensile Strain

Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel

Strain rate-dependent hardening with dislocation-twin interaction of Fe–Mn–Al–C steel using crystal plasticity

The work-hardening behavior of medium manganese steel under impact abrasive wear condition

Strengthening Contributions of Mechanical Twinning and Dislocations to the Flow Stress of Hadfield High-Manganese Steel: Quantitative Analysis

A Quantitative Insight into Strain Hardening Behavior of Typical Hadfield Steel under Dynamic Load

Quantitative Analysis of the Micromechanical Behavior and Work Hardening in Fe-0.1C-10Mn Steel Via In-Situ High-Energy X-ray Diffraction

Strain Hardening Model of Twip Steels with Manganese Content

Experimental Investigation on a Novel Medium Mn Steel Combining Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects

Microscopic mechanism of work hardening of austenitic medium manganese steel

Hot Workability of High Manganese Transformation Induced Plasticity Steel

Unusual grain-size effects on tensile deformation behavior of twinning-induced plasticity steel with low Mn content

On the Tensile Behavior of High-Manganese Twinning-Induced Plasticity Steel

Hot deformation behavior and microstructure evolution of a novel Mn-containing HEA

Austenite transformation and work hardening of medium manganese steel

Hardening mechanism of high manganese steel during impact abrasive wear