Abstract:In order to explore the influence of laser power on the evolution of molten pool and convective heat transfer of laser cladding Incoloy 926 on stainless steel surface, a three-dimensional thermal fluid multi-field coupled laser cladding numerical model was established in this paper. The variation of latent heat during solid-liquid phase transformation was treated by apparent heat capacity method. The change in the gas–liquid interface was tracked using the mesh growth method in real time. The instantaneous evolution of temperature field and velocity flow field of laser cladding Incoloy 926 on a stainless steel surface under different laser power was discussed. The solidification characteristic parameters of the cladding layer were calculated based on the temperature-time variation curves at different nodes. The mechanism of the impact of laser power on the microstructure of the cladding layer was revealed. The experiment of laser cladding Incoloy 926 on 316L surface was carried out under different laser power. Combined with the numerical simulation results, the effects of laser power on the geometrical morphology, microstructure and element distribution of the cladding layer were compared and analyzed. The results show that with the increase in laser power, the peak temperature and flow velocity of the molten pool surface both increase significantly. The thermal influence of the molten pool center on the edge is enhanced. The temperature gradient, solidification rate, and cooling rate increased gradually. The microstructure parameters (G/R) are relatively small when the laser power is 1000 W. In the experimental range, the dilution rate and wetting angle of the cladding layer both increase with the increase in laser power. When the laser power is 1000 W, the alloying elements of the cladding layer are more evenly distributed and the microstructure is finer. The experimental results are in good agreement with the simulation results.

Effect of laser powers on the mechanical properties 27SiMn steel with Inconel 718 cladding coatings

Effects of Different Powder Feeding Rates on Microstructure and Mechanical Properties of IN718 Cladding Coating

Influence of Powder Mass Flow Rates on Wear Resistance and Impact Toughness of Inconel 718 Surface Coatings

Influence of laser scanning speed on the microstructure and wear resistance properties of Inconel 718 coating

Study on the Influence of Laser Power on the Heat–Flow Multi-Field Coupling of Laser Cladding Incoloy 926 on Stainless Steel Surface

Effect of Si on the mechanical properties of Inconel 625 laser cladding layer

Numerical simulation and solidification characteristics for laser cladding of Inconel 718

Effect of laser cladding parameters on Inconel 718 coating performance and multi-parameter optimization

Effect of process optimization on laser additive manufacturing of Inconel 718 alloy based on finite element analysis: Thermal and structural evaluation

Numerical Simulation and Multi-Objective Parameter Optimization of Inconel718 Coating Laser Cladding

Microstructure and corrosion-wear behaviors for laser cladding repaired martensitic stainless steels using Co-based and Ni-based powders

Microstructure and wear properties of laser-clad NiCo alloy coating on Inconel 718 alloy

Effect of Laser Power and Scanning Speed on the Microstructure and Mechanical Properties of SLM Fabricated Inconel 718 Specimens

Statistical Analysis of Morphological Characteristics of Inconel 718 Formed by High Deposition Rate and High Laser Power Laser Cladding

Effect of Laser Energy Density on the Microstructure, Mechanical Properties, and Deformation of Inconel 718 Samples Fabricated by Selective Laser Melting

Effect of Laser Energy Density on the Microstructure and Microhardness of Inconel 718 Alloy Fabricated by Selective Laser Melting

Microstructure and properties of laser-clad high entropy alloy coating on Inconel 718 alloy

Effect of Cooling Method on Formability of Laser Cladding IN718 Alloy

Study on the Deformation Control and Microstructures of Thin-Walled Parts Repaired by Laser Cladding

Effect of laser power on the microstructure and corrosion resistance of laser cladding Mo2NiB2 coatings

A Comparative Study on Microstructure and Properties of Ultra-High-Speed Laser Cladding and Traditional Laser Cladding of Inconel625 Coatings