Abstract:Sulfur hexafluoride (SF6), a kind of gas with strong electronegativity, outstanding insulation property and arc quenching performance under a certain pressure, is widely used in medium and high voltage electrical equipment. Almost all circuit breakers of 126kV and above voltage level use SF6 gas as dielectric and arc quenching medium. SF6 gas will decompose to form sulfur fluorides and fluoride ions under the high temperature produced by arcing, and these intermediates will react with metallic elements from gas chamber or the materials of contacts to form solid state products adhering to gas chamber in the high temperature produced by arcing, which have effect on the insulation performance and breaking capability. Researches showed that the characteristics of SF6 gas decomposition products had relation to different type of latent failures, thus analyzing SF6 gas decomposition products is an effective method to status assessment and fault diagnosis of SF6 gas insulated equipment. However, most researches focused on the gaseous decomposition products but few on solid state decomposition products which result from the difficulty of detection and less information for discharging recognition. To research the component of the solid state SF6 decomposition products and to investigate the relationship between the form of solid state products and breaking tests, a 40.5kV SF6 circuit breaker was chosen as the test object, and a series of current breaking tests ranging from 6.5kA to 14.6kA were carried out in the high voltage synthesis circuit. After breaking tests, the SF6 circuit breaker was disassembled, solid state products was found in the arc quenching chamber and was analyzed by scanning electron microscope (SEM) and energy disperse spectroscopy (EDS). The result showed that the main metallic elements detected in the attachments and powders which were collected in different parts of the test object were Cu, Ag and W, and the non-metallic element detected is O and S; these elements existed in the form of metal-sulfide, oxide and fluoride, and the copper oxide accounted for 85% in mass fraction. In addition, trace amounts of Fe and Cr were found on the surface of filter washer. The mass fraction of S element increased in the serious eroded area. From the experiment results, reaction mechanism of the formation process of solid products was analyzed according to the material consisting of gas chamber and the decomposition mechanism of SF6 gas. SF6 gas decomposed to sulfur fluorides of low valence and F atoms or ions, or further decomposed to S atoms or ions and F atoms or ions under high temperature. The metal of Cu and Cr in the arc quenching chamber or contacts reacted with these SF6 decomposition intermediates to form metal sulfide and fluoride respectively. Further, trace amounts of water and oxygen which existed in the arc quenching chamber dissociated, O reacted with metal element in the arc quenching chamber to form the corresponding metal oxide. Through analyzing the components of solid state SF6 decomposition products, it can provide guidance for the maintenance, status assessment and fault diagnosis of SF6 circuit breaker in operation.

Thermal Decomposition of Epoxy Resin Under SF6 Atmosphere

Influence of Trace H2O and O-2 on SF6 Decomposition Products under Arcing Conditions in Electric Power Equipment

Study on SF6 Decomposition Characteristics under Thermal Fault and Its Representation Method

Analysis of Decomposition By-Products and Its Formation Mechanism of SF6/N2 Mixed Gases under Spark Discharge

Electrochemical And Infrared Absorption Spectroscopy Detection Of Sf6 Decomposition Products

Decomposition Characteristics of SF6 under Arc Discharge and the Effects of Trace H2O, O2, and PTFE Vapour on Its By-Products

Influence of Arcing Contacts Erosion on Decomposition Products under Arc Discharge in SF6 Circuit Breaker

Decomposition Characteristics of Sf6 under Creeping Discharge on Solid Insulator

Analysis of SF6 Solid Decomposition Products after Breaking Tests

Influence of Trace H(2)O and O(2) on SF(6) Decomposition Products under Arcing Conditions in Electric Power Equipment

Decomposition Characteristics of SF 6 under Overheating Conditions

Investigation on SF_6 Decomposition with Needle-to-plate Defect Via Infrared Detection Method

SF<sub>6</sub> Decomposition of Typical CT Defect Models

The Mechanism of SF6 Decomposition Characteristics under Partial Discharge at Different Gas Pressures and Voltage

Decomposition Characteristics of SF6under Three Typical Defects and the Diagnostic Application of Triangle Method

Kinetic Analysis Of The Effect Of O-2 On Sf6 Over-Thermal Decomposition

Compositions of SF6 - H2O Decaying Arc at a Temperature Range of 1000–12000 K

Theoretical Study on Decomposition Mechanism of Insulating Epoxy Resin Cured by Anhydride

Isotope Tracing Experiment on the Mechanism of O2 on the Over-Thermal Decomposition of SF6

Research on SF6 gas decomposition detection method based on electrochemical sensors

Investigation on the Formation Reactions of SOF4 and SO2F2 under Electric Discharges