Abstract:The coatings on wood must sometimes give aesthetic and basic protection to wooden elements and prevent the development and transmission of microorganisms. Several polymers containing different nanoparticles have already been offered to day for this purpose. The research presents a novel poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)/polyvinylpyrrolidone (PVP) polymer composite with MoO 3 nanowires with the ability to form coating films on wood. The films of the developed coating exhibit elastic behaviour, which depends on the coating film thickness [tested wet film thicknesses (90, 180 and 360) μm]. The coating showed the ability to interact well with the surface of common beech ( Fagus sylvatica L.) wood, in terms of wetting (contact angles of 15.6°), fast spilling on the surface, good penetration of the coating in wood structure and formation of up to 40 μm-thick films with excellent pull-off adhesion strength (6 MPa). An increased roughness of wood coated with C + MoO 3 was a consequence of wood etching by the dimethylformamide solvent present in the coating. Moreover, the presence of C + MoO 3 on wood made it considerably more hydrophobic, with contact angle of water raising to 123° from initially 46° measured on uncoated wood. The irradiation of wood surfaces with ultra-violet light resulted in visible colour changes on both uncoated and coated wood. The wood coated with C + MoO 3 has a good resistance to water, alcohol and dry heat (grade 3 to 4). The antimicrobial testing showed that the presence of MoO 3 in the coating plays an important role in the resistance of the coated wood to blue-stain fungi and mould development. The developed PVDF-HFP/PVP/MoO 3 coating has an excellent ability to interact with the wood surface and has the potential to be used as a protection for wood in sensitive environments.

Ability of metallic nano-particles to provide UV protection to wood surface: a preliminary experiment

Simultaneous Improvement of Surface Wettability and UV Resistance of Wood with Lignin-Based Treatments

Improving Wood Resistance to Decay by Nanostructured ZnO-Based Treatments

The Effect of ZnO Nanoparticles on Weathering Performance of Wood Plastic Composites

Improved Durability of Wood Treated with Nano Metal Fluorides against Brown-Rot and White-Rot Fungi

Improvement of weathering and thermal resistance of wood-plastic composites with iron oxide nanoparticles

Comparison of ZnO nanorod array coatings on wood and their UV prevention effects obtained by microwave-assisted hydrothermal and conventional hydrothermal synthesis

Hydrothermal synthesis of zirconium dioxide coating on the surface of wood with improved UV resistance

Carbon dots: building a robust optical shield for wood preservation

The Effect of Antibacterial and Waterproof Coating Prepared From Hexadecyltrimethoxysilane and Nano-Titanium Dioxide on Wood Properties

Caffeine and TiO2 Nanoparticles Treatment of Spruce and Beech Wood for Increasing Transparent Coating Resistance against UV-Radiation and Mould Attacks

Improved UV resistance in wood through the hydrothermal growth of highly ordered ZnO nanorod arrays

Green Synthesis and Characterization of Zirconium Oxide Nanoparticles by Using a Native Enterobacter Sp. and Its Antifungal Activity Against Bayberry Twig Blight Disease Pathogen Pestalotiopsis Versicolor.

Preparation of uniform lignin/titanium dioxide nanoparticles by confined assembly: A multifunctional nanofiller for a waterborne polyurethane wood coating

Leachability and Anti-Mold Efficiency of Nanosilver on Poplar Wood Surface

Poplar wood treated with nano-silver–copper particles: fungal degradation and leaching analysis

Improving the Decay Resistance of Wood through the Fixation of Different Nanoparticles Using Silica Aerogel

Application and characterization of a novel PVDF-HFP/PVP polymer composite with MoO3 nanowires as a protective coating for wood

Mechanical properties and photostability of fast-growing wood deposited with nano-Al2O3/ZnO composite films

Influence of Zinc Oxide Nanoparticles on Flame Resistance in Wood Plastic Composites

CNCs and CeO2 as organic-inorganic additives to enhance HPC bio-polymer wood coatings against photochemical degradation