Abstract:The F317 fault, as a major tectonic zone in the Jianshan mine area, influences the geotectonic features and geomechanical properties of the mine area. Mining operations need to be conducted within these tectonic systems, so it is important to fully study and understand the characteristics and evolution of these tectonic systems to develop reasonable mining plans and safety measures. Aiming at the problem that the existence of the F317 fault affects the stability of the west road during the mining of the security pillar at The Jianshan underground mine in Panzhihua Iron Mine, the mechanical model of the fault surface was established through the theory of material mechanics. The mechanical criterion of fault slip during the security pillar retrieval process was obtained and combined with the contact surface theory in the numerical analysis software FLAC3D. Two numerical calculation models with and without the F317 fault were established to analyze the change characteristics of the maximum tensile stress and displacement of the road protection zone under different simulation scenarios. The influence of the fault’s presence on the surface road’s stability during the security pillar retrieval process was obtained. The study results show that changes in positive and shear stresses at the fault face caused by the security pillar retrieval process are the main factors influencing the fault slip. The upper side of the fault tends to slip along the fault face during the security pillar retrieval process, which theoretically prevents the transfer of subsidence displacement caused by underground mining to the roadside (foot side of the fault). The presence of the F317 fault has less effect on the tensile stresses at the road protection zone. Still, the fault allows the tensile stresses to be concentrated at the top and bottom of the quarry and at the isolated pillar, which is more likely to cause the rock to be stretched and squeezed. Without the F317 fault, the maximum subsidence displacement at the road protection zone is 30.59 mm, the maximum X-directional displacement is 42.17 mm (both of which are greater than the safe displacement limit by 20 mm), and the maximum Y-directional displacement is 19.75 mm, which is less than the safe displacement limit by 20 mm. Compared with the case without the F317 fault, the displacement at the road protection zone with the F317 fault is smaller, with a maximum subsidence displacement of 16.92 mm, a maximum X-directional displacement of 19.63 mm, and a maximum Y-directional displacement of 3.35 mm, all of which are less than the safe displacement limits. Therefore, the presence of the F317 fault provides some protection to the west side of the road from collapse due to underground mining.

Analysis of the Regularity and Mechanism of Fault Activation Caused by Deep Continuous Mining of Shizishan Copper Mine, China

A numerical simulation technique to study fault activation characteristics during mining between fault bundles

Experimental Study on the Mechanisms of Fault Reactivation and Coal Bumps Induced by Mining

Simulation of the activation of mining faults and grouting reinforcement under thick loose layer and thin bedrock

Interaction law between mining stress and fault activation and the effect of fault dip angle in longwall working face

Determination of mine fault activation degree and the division of tectonic stress hazard zones

Study on Overburden Rock Movement and Stress Distribution Characteristics under the Influence of a Normal Fault

Damage features and dynamic triggering mechanism of the Jianshanying landslide induced by underground mining in Shuicheng County, Guizhou Province, China

Numerical simulation of the effect of fault inclination on the sudden water of the fault bottom plate

Dynamic Mechanical Response and Movement Evolution Characteristics of Fault Systems in the Coal Mining Process

Numerical Simulation of Fault Activation Pattern Induced by Coal Extraction

The Mechanical Criterion of Activation and Instability of Normal Fault Induced by the Movement of Key Stratum and Its Disaster-Causing Mechanism of Rockburst in the Hanging Wall Mining

Numerical Modeling and Investigation of Fault-Induced Water Inrush Hazard under Different Mining Advancing Directions

Failure Mechanism Analysis of Mining-Induced Landslide Based on Geophysical Investigation and Numerical Modelling Using Distinct Element Method

Experimental Research on Characteristics of Fault Activation and Confined Water Rising

Numerical Simulation of Underground Mining-Induced Fault-Influenced Rock Movement and Its Application

Mechanism of Overlying Strata Migration and Failure During Underground Mining in the Mountainous Carbonate Areas in Southwestern China

Theoretical and numerical investigations on mining-induced fault activation and groundwater outburst of coal seam floor

Mining-induced fault failure and coseismic slip based on numerical investigation

Study on the influence of the fault dip angle on the stress evolution and slip risk of normal faults in mining

Anatomy of mining-induced fault slip and a triggered rockburst