Abstract:The formation of water-conducting fractures in overlying strata caused by underground coal mining not only leads to roof water inrush disasters, but also water-conducting fractures penetrate the aquifer, resulting in the occurrence of a mine-water-inrush disaster and the loss of water resources. It destroys the sustainability of surface water and underground aquifers. This phenomenon is particularly significant in extra-thick coal seams and fault-bearing areas. Numerical simulation is an effective method to predict the failure range of mining overburden rock with low cost and high efficiency. The key to its accuracy lies in a reasonable constitutive model and simulation program. In this study, considering that the three parts of penetrating cracks, non-penetrating cracks, and intact rock blocks are often formed after rock failure, the contact state criterion and shear friction relationship of discrete rock blocks and the mixed fracture displacement–damage–load relationship are established, respectively. Combined with the Mohr–Coulomb criterion, the constitutive model of mining rock mass deformation–discrete block motion and interaction is formed. On this basis, according to the engineering geological conditions of Yushupo Coal Mine, a numerical model for the development of water-conducting cracks in the roof with faults under repeated mining of extra-thick coal seams is established. The results show the following: The constitutive relation of the continuous deformation–discrete block interaction of overlying strata and the corresponding finite element–discrete element FDEM numerical program and VUSDFLD multi-coal seam continuous mining subroutine can numerically realize the formation process of faults and water flowing fractures in overlying strata under continuous mining of extra-thick multi-coal seams. The toughness of sand mudstone is low, and the fracture will be further developed under the repeated disturbance of multi-thick coal seam mining. Finally, it is stabilized at 216–226 m, and the ratio of fracture height to mining thickness is 14.1. When the working face advances to the fault, the stress concentration occurs in the fault and its overlying rock, which leads to the local fracture of the roof rock mass and the formation of cracks. The fault group makes this phenomenon more obvious. The results have been preliminarily applied and tested in Ningwu mining area, which provides theoretical support for further development of roof water disaster control under the condition of an extra-thick coal seam and avoids the loss of water resources in surface water and underground aquifers.

Dynamic Mechanical Response and Movement Evolution Characteristics of Fault Systems in the Coal Mining Process

Study on Instability Fracture and Simulation of Surrounding Rock Induced by Fault Activation under Mining Influence

The Dynamic Response and Failure Model of Thin Plate Rock Mass under Impact Load

Experimental Study on the Mechanisms of Fault Reactivation and Coal Bumps Induced by Mining

Study on Overburden Rock Movement and Stress Distribution Characteristics under the Influence of a Normal Fault

The Mechanical Criterion of Activation and Instability of Normal Fault Induced by the Movement of Key Stratum and Its Disaster-Causing Mechanism of Rockburst in the Hanging Wall Mining

Caving-induced fault reactivation behaviour and its effects on mining safety with a multiple seam context

Numerical Simulation of Fault Activation Pattern Induced by Coal Extraction

Numerical Modeling and Investigation of Fault-Induced Water Inrush Hazard under Different Mining Advancing Directions

A numerical simulation technique to study fault activation characteristics during mining between fault bundles

Development of physical model test system for fault-slip induced rockburst in underground coal mining

Experimental research on fault reactivation and relating coal bumps

Study of the Influence of Damage Structures in Coal Seam Floors on the Damage of Small Hidden Faults

Analysis of Rock Burst Mechanism in Extra-Thick Coal Seam Controlled by Thrust Fault under Mining Disturbance

Deformation and damage dynamic characteristics of coal–rock materials in deep coal mines

Numerical Simulation of Mining-Induced Stress Evolution and Fault Slip Behavior in Deep Mining

Law of Movement of Discontinuous Deformation of Strata and Ground with a Thick Loess Layer and Thin Bedrock in Long Wall Mining

Study on overburden failure characteristics and displacement rule under the influence of deep faults

Finite–Discrete Element Method Simulation Study on Development of Water-Conducting Fractures in Fault-Bearing Roof under Repeated Mining of Extra-Thick Coal Seams

Theoretical and Numerical Investigations of the Failure Characteristics of a Faulted Coal Mine Floor Above a Confined Aquifer

Fault reactive induced by the principal stress rotation for the underground coal mining