Abstract:Deep high static loading roadway is extremely prone to rock burst under dynamic load disturbance. The “force-energy criterion” for the failure of surrounding rock in such deep roadways and the “energy criterion” for the rock burst was established by considering the stress and energy evolution characteristics of rock burst under this circumstance. Under the engineering background of the main roadway in No.1 mining area of Gaojiapu Coal Mine in Binchang Mining Area, Shaanxi Province, China, the partial stress field and distortion energy field of surrounding rock in the main roadway and the spatial-temporal evolution laws under dynamic load disturbance were simulated and analyzed by using a built-in dynamic module of FLAC3D. Results show that after the dynamic load disturbance, the partial stress and distortion energy are concentrated in the shallow part at two walls of the roadway in the early phase. With the continuous propagation of dynamic load stress wave, the partial stress and distortion energy are transferred to the deep part. The sudden high-energy release occurred in the peak zone of partial stress, leading to the plastic failure of coal and rock mass. Subsequently, the distortion energy was fully accumulated in the original plastic zone and transferred from shallow surrounding rocks to the deep surrounding rocks in the roadway, where the partial stress and distortion energy of coal and rock mass reached the yield conditions. Thus, the original plastic zone was sharply expanded, thereby forming a new plastic zone. The coal and rock mass experienced an approximately static failure when no residual energy (ΔU) was found in it. When ΔU > 0, the rock mass experienced dynamic failure, and ΔU was mainly the volume transformation energy, which is approximately one-half of the total elastic strain energy. ΔU was transformed into the initial kinetic energy of broken coal and rock mass. Thus, the coal and rock mass are burst out. In severe cases, this condition was manifested by the rock burst in the main roadway. An optimization scheme of prevention and control measures for rock burst was proposed on the basis of the above conclusions. The microseismic activity laws before and after the unloading were compared, and a good effect was achieved. The research results can lay a theoretical foundation for predicting and preventing rock bursts in coal mines by actively regulating the disaster-pregnant environment and mitigating the disaster-inducing conditions.

Development of physical model test system for fault-slip induced rockburst in underground coal mining

Multiparameter Monitoring and Prevention of Fault-Slip Rock Burst

The Mechanical Criterion of Activation and Instability of Normal Fault Induced by the Movement of Key Stratum and Its Disaster-Causing Mechanism of Rockburst in the Hanging Wall Mining

Anatomy of mining-induced fault slip and a triggered rockburst

Study on Overburden Rock Movement and Stress Distribution Characteristics under the Influence of a Normal Fault

Mechanical Properties and Control Rockburst Mechanism of Coal and Rock Mass with Bursting Liability in Deep Mining

Analysis of Rock Burst Mechanism in Extra-Thick Coal Seam Controlled by Thrust Fault under Mining Disturbance

A Stress Model Reflecting the Effect of the Friction Angle on Rockbursts in Coal Mines

Destabilization and energy characteristics of coal pillar in roadway driving along gob based on rockburst risk assessment

Dynamic Mechanical Response and Movement Evolution Characteristics of Fault Systems in the Coal Mining Process

Rock Burst Mechanism under Coupling Action of Working Face Square and Regional Tectonic Stress

Dynamic Response Mechanism of Impact Instability Induced by Dynamic Load Disturbance to Surrounding Rock in High Static Loading Roadway

Prediction of rockbursts in a typical island working face of a coal mine through microseismic monitoring technology

Numerical Simulation on Failure Effect of Mining-Induced Dynamic Loading and Its Influential Factors

Research on Mechanisms and Precursors of Slip and Fracture of Coal–Rock Parting–Coal Structure

Experimental Investigation and Analysis of Triggering Mechanism for Fault-Slip Bursts of the Tunnel Surrounding Rock with External Disturbance

Study on the dynamic response and the hazard of rock burst under the influence of fault slip

An Integration Method of Bursting Strain Energy and Seismic Velocity Tomography for Coal Burst Hazard Assessment

Energy evolution mechanism during rockburst development in structures of surrounding rocks of deep rockburst-prone roadways in coal mines

Experimental investigation on rockburst behavior of the rock-coal-bolt specimen under different stress conditions

Mechanical behaviors and failure characteristics of coal-rock combination under quasi-static and dynamic disturbance loading: a case based on a new equipment