Abstract:In underground coal mining, the presence of high-permeability geological faults may cause a large amount of groundwater to suddenly erupt from the aquifer, resulting in undesirable casualties and economic losses. In order to deeply understand the mechanism of underground water inrush caused by typical faults in eastern China, the Zhuxianzhuang Coal Mine was selected as an engineering project case study. The study was analyzed by means of similar-physical experiments and numerical analysis. Research shows the following: (1) Similar-physical experiment results indicate that the evolution process of fault seepage can be divided into five stages: seepage initiation, seepage development, seepage mutation, seepage burst and seepage stability. Seepage types can be summarized as initial pore flow, middle fracture flow, and late channel flow. It is clear that the water pressure, the thickness of aquifuge and the material gradation have an important influence on the seepage characteristics of fault. The migration and loss of particle fillings in fault are the main factors of seepage changes. Under the sustained action of water pressure, the permeability of fault continuously increases, and eventually the fracture flow converts into the channel flow, resulting in the formation of water inrush channels in fault. (2) Numerical simulation results indicate that the failure zone in the floor strata can be divided into mining-induced damage zone, effective water-resisting zone, and fault activation zone, the effective water-resisting zone is the key part of preventing water inrush. Cracks propagation, stress distribution and seepage evolution in the floor strata can be visualized during the formation of the water inrush pathway. Once mining-induced cracks intersect with cracks caused by fault activation, the seepage increases rapidly, and groundwater will flow into the mining face, resulting in water inrush. (3) When mining coal mines with high-permeability faults, the seepage in faults should be regularly monitored, and sufficient attention should be paid to the seepage mutation, which is crucial for accurately assessing the risk of water inrush from fault.

The Numerical Analysis of Fault-Induced Mine Water Inrush Using the Extended Finite Element Method and Fracture Mechanics

Numerical Modeling and Investigation of Fault-Induced Water Inrush Hazard under Different Mining Advancing Directions

Numerical simulation of the effect of fault inclination on the sudden water of the fault bottom plate

Numerical Simulation of Mining-Induced Stress Evolution and Fault Slip Behavior in Deep Mining

Mechanism of Water Inrush Through Fault Zones Using a Coupled Fluid–solid Numerical Model: A Case Study in the Beiyangzhuang Coal Mine, Northern China

Rock Damage Model Coupled Stress–Seepage and Its Application in Water Inrush from Faults in Coal Mines

Theoretical and Numerical Investigations of the Failure Characteristics of a Faulted Coal Mine Floor Above a Confined Aquifer

Numerical Simulation and Risk Assessment of Water Inrush in a Fault Zone that Contains a Soft Infill

Mechanism and experimental investigation of sudden water inrush hazards in surrounding rock due to shear fracture in deep mining operations

Theoretical and numerical investigations on mining-induced fault activation and groundwater outburst of coal seam floor

Experimental Simulation of Fault Water Inrush Channel Evolution in a Coal Mine Floor

Numerical Simulation of the Lagging Water Inrush Process from Insidious Fault in Coal Seam Floor

Evolution of mining-induced water inrush disaster from a hidden fault in coal seam floor based on a coupled stress–seepage–damage model

Progressive Evolution Model of Fault Water Inrush Caused by Underground Excavation Based on Multiphysical Fields

Numerical Simulation of Water–Silt Inrush Hazard of Fault Rock: A Three-Phase Flow Model

Water Inrush Mechanism in Fault Fracture Zone Based on a Nonlinear Mechanical Model of Three Flow Fields

Numerical Simulation of Mine Water Inflow with an Embedded Discrete Fracture Model: Application to the 16112 Working Face in the Binhu Coal Mine, China

Coupled Hydro-Mechanical XFEM Analysis for Multi-Fracturing Through an Excavation Driven by an Underlying Aquifer: a Forensic Case Study

Research on the Underground Water Inrush Mechanism Based on the Influence of Fault

Water Inrush Mechanism of Roof Induced by the Fault Weakening Effect in the Coal Mining

A numerical simulation technique to study fault activation characteristics during mining between fault bundles