Abstract:High energy, high strength, and stable combustion character are the basic requirements of a modern gun propellant (GP). Herein, graphene nanosheets (GNSs) are introduced into the nitroguanidine gun propellant (NQ-GP) as reinforcements to modify its comprehensive performance. A series of in-depth characterizations were conducted to characterize the structure and composition of the propellant, demonstrating that GNSs integrated well in the propellant system. The result of mechanical properties manifested that the anti-impact strength increased with the increase in the content of GNSs in the propellant, and GNSs with a low content of 0.5% in the GP exerted better mechanical strength than those with a high content under different temperature conditions; the brickwork bridging effect enhancement mechanism was proposed as well. Besides, the thermal decomposition character was investigated under different heating conditions like programmed and high pressure. It revealed that GNSs with a high content can produce a catalytic effect on the thermal decomposition process of the propellant like the heat release. Additionally, the analysis of the thermal decomposition kinetics of the propellant by the method of Friedman demonstrated that the addition of GNSs with a proper content could further enhance the activation energy of NQ-GP with thermal stability, which is opposite to the result of linear fitting methods of Kissinger and Ozawa. The results obtained by the different methods were likely to vary with the action mechanisms of the different systems or thermal decomposition stages. It also demonstrated that different high-pressure conditions and GNS contents can produce obvious influence on the thermal decomposition behavior of the propellant, such as T p and heat release. Moreover, it was found that the introduction of GNSs would not influence the burning stability of the propellant and that the burning rate coefficient (a) and the burning pressure exponent (n) could also be modified with the proper content of GNSs. Hence, the work presented herein highly broadens the application scope of the reinforcement nanofiller and will be of potential value to the community development in high-energy and high-strength GPs.

3D printing of gun propellants based on laminated object manufacturing

Construction of Smart Propellant with Multi-Morphologies

Extrusion‐printing additive manufacturing of composite solid propellant by fast curing isocyanated‐HTPB and HTPB blending‐extruded via a static mixer

Effect of Printing Parameters on the Surface Roughness of 3D-Printed Melt-Cast Explosive Substitutes Based on Melt Extrusion Technology

Pressure-assisted Binder Jet Additive Manufacturing of Solid Propellants

Experimental study on thermal expansion coefficient of composite multi-layered flaky gun propellants

Rheological and Mechanical Characterization of 3D-Printable Solid Propellant Slurry

Additive Manufacturing of a Special-Shaped Energetic Grain and Its Performance

Integrated Additive Manufacturing Technology of Composite Solid Propellant and Resistive Temperature Sensor

Effect of Penetrative Combustion on Regression Rate of 3D Printed Hybrid Rocket Fuel

Improving flowability of the propellant prepared by solventless extrusion process by integration dendrimer and investigation on its thermal, sensitivity, and combustion features

One-step green method to prepare progressive burning gun propellant through gradient denitration strategy

Influence of the printing process on the traces produced by the discharge of 3D-printed Liberators

Three-dimensional printed metal-nested composite fuel grains with superior mechanical and combustion properties

Influence of different energetic plasticizers on the performance of NC-RDX nitramine gun propellants

Combustion Characteristics of Vat-Photopolymerized Fuels with a Spiral Star Port for Hybrid Propulsion

Dynamic Layer-by-layer Surface Self-Assembly on Aluminum Fuel for Improving the Comprehensive Performance of Propellants

Modified Mechanical Strength, Thermal Decomposition, and Combustion Characteristics of Nitroguanidine Propellant with Graphene Nanosheets as Reinforcement

Ablation Characteristics Research in Solid Rocket Motor's Combustion Chamber Produced by 3D Printing

Fabrication of Energetic Composites with 91% Solid Content by 3D Direct Writing

Design, Production and Evaluation of 3D-Printed Mold Geometries for a Hybrid Rocket Engine