Abstract:Binder jetting additive manufacturing (BJAM), a combination of liquid binder and solid powders, was widely utilized to fabricate complex–structured alumina (Al 2 O 3 ) ceramic cores. However, the high porosity, high brittleness and low mechanical strength of Al2O3 ceramics generally limit their industrial applications. To balance the contradiction between porosity and bending strength and improve the fracture toughness of Al2O3 ceramic core, sodium silicate (Na2O·3.2SiO2) solution and 5 mol% yttrium oxide stabilized zirconia (5YSZ) nanopowders were selected as densifier and toughening phase in this study. By means of the vacuum infiltration and sintering process, the effects of Na2O·3.2SiO2 contents, sintering temperatures and 5YSZ amounts on porosity, bending strength, and fracture toughness of Al2O3 ceramic were systematically investigated. Results show that the porosity and fracture stress of Al 2 O 3 infiltrated with 30 wt.% Na 2 O·3.2SiO 2 solution sintered at 1550 °C reached 21.4±1.1% and about 52.7 MPa, respectively. When the amounts of 5YSZ in 30 wt.% Na 2 O·3.2SiO 2 solution were increased from 0 wt.% to 6 wt.% and the sintering temperatures were varied from 1400 °C to 1550 °C, the fracture toughness of Al 2 O 3 ceramic gradually enhanced to the maximum value of 2.8185±0.071 MPa/m 1/2 obtained at 4 wt.% 5YSZ and 1550 °C, which was increased by 87.44% compared with the infiltrated sample without 5YSZ. Therefore, using BJAM technology to fabricate a strong–tough Al 2 O 3 ceramic cores for the turbine blades casting could realize short process and efficient preparation of the ceramic cores, which had a great theoretical foundation and application potential in the casting field.

Fabrication and properties of a stable and porous YSZ/nano-HA structure by binder jetting processes

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Internal Nano Voids in Yttria-Stabilised Zirconia (YSZ) Powder

Microstructure and permeability of porous YSZ ceramics with aligned and gradient pore channels fabricated by freeze casting

A Novel Way to Fabricate Highly Porous Fibrous YSZ Ceramics with Improved Thermal and Mechanical Properties

Porous Yttria‐stabilized Zirconia Ceramics Fabricated by Nonaqueous‐Based Gelcasting Process with PMMA Microsphere As Pore‐Forming Agent

Influence of Solid Loading in the Gel-Casting Process on the Microstructure and Properties of Porous YSZ Ceramics

Preparation of unidirectional porous yttria stabilized zirconia ceramics by an alginate self assemble method

Forming and Sintering of Y-TZP Nanoceramics

Effect of sodium silicate solution combined yttrium oxide stabilized zirconia nanopowders on the properties of alumina ceramics fabricated by binder jetting additive manufacturing

High-strength porous YSZ ceramics fabricated by TBA-based gelcasting with high solid loading slurry

Effect of Sintering Temperature on Compressive Strength of Porous Yttria-Stabilized Zirconia Ceramics

Preparation and properties of yttria-stabilized tetragonal phase zirconia nano-ceramics by high gravity

Effects of Pore-Forming Agent Content on the Properties of Porous 8ysz Ceramics by Tba Based Gel-Casting

Effects of mono-dispersed PMMA micro-balls as pore-forming agent on the properties of porous YSZ ceramics

Preparation and performance of zirconium oxide-toughened hydroxyapatite nano-composite porous bioceramic

Compression strength and fracture mechanism of a hierarchical porous yttria-stabilized zirconia microsphere prepared using electro-spraying associated with phase inversion technique

The Novel Combination of Electrostatic Powder Coating with Suspension Coating for Fabricating the Dense YSZ Thin Film on Porous Anode Substrate

Preparation and characterization of yttria-stabilized zirconia nanotubes

Spontaneous Adsorption Effect of Graphitic Carbon Nitride Nanosheets to Improve Sintering Behavior of Yttria-stabilized Zirconia Microbeads

Microstructural Evolution and Mechanical Properties of Nano-Atz Ceramics by Solid Solution Precipitation