Abstract:A greater understanding of protein functionality and its impact on processing and end-product quality is critical for the success of the fast-growing market for plant-based meat products. In this research, simple criteria were developed for categorizing plant proteins derived from soy, yellow pea, and wheat as cold swelling (CS) or heat swelling (HS) through various raw-material tests, including the water absorption index (WAI), least gelation concentration (LGC), rapid visco analysis (RVA), and % protein solubility. These proteins were blended together in different cold-swelling: heat-swelling ratios (0:100 to 90:10 or 0–90% CS) and extruded to obtain texturized vegetable proteins (TVPs). In general, the WAI (2.51–5.61 g/g) and protein solubility (20–46%) showed an increasing trend, while the LGC decreased from 17–18% to 14–15% with an increase in the % CS in raw protein blends. Blends with high CS (60–90%) showed a clear RVA cold viscosity peak, while low-CS (0–40%) blends exhibited minimal swelling. The extrusion-specific mechanical energy for low-CS blends (average 930 kJ/kg) and high-CS blends (average 949 kJ/kg) was similar, even though both were processed with similar in-barrel moisture, but the former had substantially lower protein content (69.7 versus 76.6%). Extrusion led to the aggregation of proteins in all treatments, as seen from the SDS-PAGE and SEC-HPLC analyses, but the protein solubility decreased the most for the high-CS (60–90%) blends as compared to the low-CS (0–40%) blends. This indicated a higher degree of crosslinking due to extrusion for high CS, which, in turn, resulted in a lower extruded TVP bulk density and higher water-holding capacity (average 187 g/L and 4.2 g/g, respectively) as compared to the low-CS treatments (average 226 g/L and 2.9 g/g, respectively). These trends matched with the densely layered microstructure of TVP with low CS and an increase in pores and a spongier structure for high CS, as observed using optical microscopy. The microstructure, bulk density, and WHC observations corresponded well with texture-profile-analysis (TPA) hardness of TVP patties, which decreased from 6949 to 3649 g with an increase in CS from 0 to 90%. The consumer test overall-liking scores (9-point hedonic scale) for TVP patties were significantly lower (3.8–5.1) as compared to beef hamburgers (7.6) (p < 0.05). The data indicated that an improvement in both the texture and flavor of the former might result in a better sensory profile and greater acceptance.

Effect of screw speed and die temperature on physicochemical, textural, and morphological properties of soy protein isolate-based textured vegetable protein produced via a low-moisture extrusion

Effects of extrusion screw speed, feed moisture content, and barrel temperature on the physical, techno-functional, and microstructural quality of texturized lentil protein

Influences of extrusion parameters on physicochemical properties of textured vegetable proteins and its meatless burger patty

Production of High Moisture Textured Tempeh (Fermented Soy) Protein by Single Screw Cooking Extrusion and Evaluation of its Physicochemical Properties and Sensory attributes

Understanding the mechanism for sodium tripolyphosphate in improving the physicochemical properties of low-moisture extrusion textured protein from rapeseed protein and soybean protein blends

Understanding Protein Functionality and Its Impact on Quality of Plant-Based Meat Analogues

The Experimental Study about the Influence of Extrusion System Parameters on Textured Degree of High Moisture Content Fibriform Imitated Meat

Relationship between Soybean Protein Isolate and Textural Properties of Texturized Vegetable Protein

Quality Characteristics of Meat Analogs through the Incorporation of Textured Vegetable Protein and Tenebrio molitor Larvae in the Presence of Transglutaminase

Structural and functional properties of a high moisture extruded mixture of pea proteins (Pisum sativum), amaranth flour (Amaranthus hypochondriacus), and oat flour (Avena sativa)

Characteristics of Beef Patties Substituted by Different Levels of Textured Vegetable Protein and Taste Traits Assessed by Electronic Tongue System

Conformational and Functional Properties of Soybean Proteins Produced by Extrusion-Hydrolysis Approach

Soy Protein Hydrolysates Affect the Structural and Mechanical Properties of Soy Protein-Wheat Gluten Extrudates Using High Moisture Extrusion

Characterizing The Structural And Functional Properties Of Soybean Protein Extracted From Full-Fat Soybean Flakes After Low-Temperature Dry Extrusion

Effect of extrusion conditions on physicochemical and sensorial properties of corn-broad beans (Vicia faba) spaghetti type pasta

Effect of feed moisture, extrusion temperature and screw speed on properties of soy white flakes based aquafeed: a response surface analysis

Preparation and investigation of the processing characteristics of transglutaminase cross-linked soy protein isolate–whey protein polymer

Effects of Different Soybean and Coconut Oil Additions on the Physicochemical and Sensory Properties of Soy Protein-Wheat Protein Mixture Subjected to High-Moisture Extrusion

Impact of protein content on physical and microstructural properties of extruded rice starch-pea protein snacks

Extruded soy protein as a novel emulsifier: Structure, interfacial activity and emulsifying property

Protein blends and extrusion processing to improve the nutritional quality of plant proteins