Abstract:A greater understanding of protein functionality and its impact on processing and end-product quality is critical for the success of the fast-growing market for plant-based meat products. In this research, simple criteria were developed for categorizing plant proteins derived from soy, yellow pea, and wheat as cold swelling (CS) or heat swelling (HS) through various raw-material tests, including the water absorption index (WAI), least gelation concentration (LGC), rapid visco analysis (RVA), and % protein solubility. These proteins were blended together in different cold-swelling: heat-swelling ratios (0:100 to 90:10 or 0–90% CS) and extruded to obtain texturized vegetable proteins (TVPs). In general, the WAI (2.51–5.61 g/g) and protein solubility (20–46%) showed an increasing trend, while the LGC decreased from 17–18% to 14–15% with an increase in the % CS in raw protein blends. Blends with high CS (60–90%) showed a clear RVA cold viscosity peak, while low-CS (0–40%) blends exhibited minimal swelling. The extrusion-specific mechanical energy for low-CS blends (average 930 kJ/kg) and high-CS blends (average 949 kJ/kg) was similar, even though both were processed with similar in-barrel moisture, but the former had substantially lower protein content (69.7 versus 76.6%). Extrusion led to the aggregation of proteins in all treatments, as seen from the SDS-PAGE and SEC-HPLC analyses, but the protein solubility decreased the most for the high-CS (60–90%) blends as compared to the low-CS (0–40%) blends. This indicated a higher degree of crosslinking due to extrusion for high CS, which, in turn, resulted in a lower extruded TVP bulk density and higher water-holding capacity (average 187 g/L and 4.2 g/g, respectively) as compared to the low-CS treatments (average 226 g/L and 2.9 g/g, respectively). These trends matched with the densely layered microstructure of TVP with low CS and an increase in pores and a spongier structure for high CS, as observed using optical microscopy. The microstructure, bulk density, and WHC observations corresponded well with texture-profile-analysis (TPA) hardness of TVP patties, which decreased from 6949 to 3649 g with an increase in CS from 0 to 90%. The consumer test overall-liking scores (9-point hedonic scale) for TVP patties were significantly lower (3.8–5.1) as compared to beef hamburgers (7.6) (p < 0.05). The data indicated that an improvement in both the texture and flavor of the former might result in a better sensory profile and greater acceptance.

Production of High Moisture Textured Tempeh (Fermented Soy) Protein by Single Screw Cooking Extrusion and Evaluation of its Physicochemical Properties and Sensory attributes

Effects of extrusion screw speed, feed moisture content, and barrel temperature on the physical, techno-functional, and microstructural quality of texturized lentil protein

Effect of screw speed and die temperature on physicochemical, textural, and morphological properties of soy protein isolate-based textured vegetable protein produced via a low-moisture extrusion

Utilization of Partially Purified Papain Enzyme in Mallika Black Soybean Tempeh Hydrolysate as Umami Seasoning

The Experimental Study about the Influence of Extrusion System Parameters on Textured Degree of High Moisture Content Fibriform Imitated Meat

Influences of extrusion parameters on physicochemical properties of textured vegetable proteins and its meatless burger patty

Amyloid fibrils-regulated high-moisture extruded soy proteins: Texture, structure, and taste

Development of Textured Soybean Protein Meatballs

Quality Characteristics of Meat Analogs through the Incorporation of Textured Vegetable Protein and Tenebrio molitor Larvae in the Presence of Transglutaminase

Properties of Texturized Vegetable Proteins from Edible Mushrooms by Using Single-Screw Extruder

Understanding Protein Functionality and Its Impact on Quality of Plant-Based Meat Analogues

Effects of Extrusion Parameters on the Properties of High Moisture Textured Wheat Protein

Understanding the mechanism for sodium tripolyphosphate in improving the physicochemical properties of low-moisture extrusion textured protein from rapeseed protein and soybean protein blends

Characteristics of Beef Patties Substituted by Different Levels of Textured Vegetable Protein and Taste Traits Assessed by Electronic Tongue System

Use of legume flours and fiber for tailoring structure and texture of pea protein-based extruded meat alternatives

Effect of High-Moisture Extrusion Process on Quality Attribute and Fibrous Formation Mechanism of Pea Protein: Insight into Dynamic Changes of Textural Protein

Multihole Nozzle-Mediated High-Moisture Extrusion of Soy Proteins into Fiber-Rich Structures

Textural and Organoleptic Properties of Tofu Manufactured with Micronized Full-fat Soyflour Fortified with Food Ingredients

Extrusion Technology and Raw Material System of High-moisture Textured Soy Protein

Relationship between Soybean Protein Isolate and Textural Properties of Texturized Vegetable Protein

Structural and functional properties of a high moisture extruded mixture of pea proteins (Pisum sativum), amaranth flour (Amaranthus hypochondriacus), and oat flour (Avena sativa)