Abstract:Evaluating severe accidents in Generation IV sodium-cooled fast reactors (SFRs) is challenging due to the eutectic reaction between boron carbide (B4C) and stainless steel (SS), which results in boron migration and enhanced neutron absorption. A novel quantitative visualization method using radiative heating to observe eutectic behavior and resulting melt structure during boron migration. Experiments, replicating real-scale B4C-SS control rods, were conducted in an integrated test facility under core disruptive accidents (CDAs) conditions, introducing a new approach. This study explores the long duration melting (candling phenomenon) of boron within stainless steel, shedding light on relocation behavior not previously studied. We identified two distinct failure mechanisms: the separation of SS from the B4C pellet, resulting in the formation of a later melting drop, and the fracture of the B4C pellet into multiple pieces, possibly due to thermal stress. The visualization technique and thermal interfacial resistance analysis precisely captured the eutectic temperature, aligning well with prior research. Our study yield insights into eutectic melt relocation behavior by systematically characterizing relocated solidified eutectic melt with a cooling rate of 50 °C/s in stagnant argon environment via scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), X-ray diffraction (XRD), and microhardness testing. Our study shows that due to high chromium content, (Cr,Fe)2B phases are observed in XRD analysis instead of just Fe2B phase. Other phases present in our solidified eutectic melt include γ-Fe (fcc), (Cr,Fe)23(B,C)6 (cubic), and (Cr,Fe)5B3. The atomic composition within these zones was ascertained through SEM-EDS analysis. Our study shows varying hardness values in distinct phases, reflecting differing boron concentrations within micrograph zones. Chromium promotes (Cr,Fe)2B and (Cr,Fe)5B3 boride formation, transforming the structure from tetragonal to orthorhombic with increased chromium content, thereby increasing hardness. This validates B4C-SS eutectic mixture relocation and diverse boride phase formation under extreme reactor conditions.

Solubility Equations of Boron Compounds under Coolant Conditions in VVER-Type Reactor Plants

Effect of Boric Acid Solubility in Steam on the Process of Mass Transfer during Emergency Cooling of VVER-1200 Nuclear Reactor

Solubility Isotherm Determination of the H 3 BO 3 + RbCl + H 2 O and H 3 BO 3 + NH 4 Cl + H 2 O Systems at T = 273.15, 298.15, 323.15, 348.15, and 363.15 K and Thermodynamic Modeling

Solid–Liquid Phase Equilibria and Boron Species Distribution in the Quaternary System LiCl–LiBO 2 –Li 2 B 4 O 7 –H 2 O at T = 323.15 K and P = 0.1 MPa

Theoretical assessment of boron incorporation in nickel ferrite under conditions of operating nuclear pressurized water reactors (PWRs)

Thermodynamic modeling of boron species in brine systems containing metaborate and its application in evaporation simulation

Isobaric Heat Capacity of Boric Acid Solution

γ-radiolysis of boric acid-lithium hydroxide-ammonia coolant

The Effect of Boron Forms on the Crystallization Process of Lithium Carbonate

Effect of Boron Content in LiOH Solutions on the Corrosion Behavior of Zr-Sn-Nb Alloy

Microstructure and Durability of RC in Boric Acid

Solid–Liquid Phase Equilibria of the Quaternary System NaCl–CaCl 2 –H 3 BO 3 –H 2 O at 323.15 K: Solubility Determination and Thermodynamic Model

Thermal Properties of Alkaline Sodium Borohydride Solutions

Experimental investigation of local boron concentration in a 2 × 2 rod bundle channel under subcooled boiling flow

Effect of Borate Concentration on Solidification of Radioactive Wastes by Different Cements

Solid–Liquid Phase Equilibria in Ternary Aqueous Systems (LiB5O8 + KB5O8 + H2O) and (LiB5O8 + NaB5O8 + H2O) at 288.15 K and 0.1 MPa

Solubility determination and thermodynamic modeling in the quaternary system Li2SO4 – LiBO2 – Li2B4O7 – H2O at T = 308.15 K and p = 0.1 MPa

Numerical Investigation of a Class of Accidents in the Generation IV Brest Reactor Involving the Formation of a Solid Phase in the Lead Coolant

Eutectic melting and relocation behavior of B4C pellet-stainless steel under radiative heating

Thinning behavior of solid boron carbide immersed in molten stainless steel for core disruptive accident of sodium-cooled fast reactor

Physicochemical Conditions of Boron–Siliconizing of Molybdenum-Based Alloys in Chlorine and Fluorine Medium