Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The machinability of 2.5D C/SiC composites is severely limited by their inherent brittleness, inhomogeneity, and anisotropy. Conventional machining techniques are often associated with several drawbacks, including elevated costs, significant tool deterioration, and suboptimal efficiency. In contrast, short electric arc milling (SEAM) emerges as a promising innovation in the field of specialized machining, serving as a crucial technical approach for the effective processing of conductive materials that pose machining challenges. This work explores the surface quality law after short arc machining of 2.5D C/SiC composites under different process parameters and investigates etching damage incurred. To assess the influence of different parameters on the surface quality post-machining, two evaluation indices were established: surface roughness (Sa) and the thickness of the heat-affected layer (HAL). A one-factor test was set up to analyze the voltage and current waveforms, the electron microscopy images of the processed surface, Raman spectra, and the surface energy spectrum, using Sa, HAL, and the microscopic morphology as the detection indices. Moreover, the study demonstrates that the arc discharge energy and the discharge frequency exert considerable influences on the quality of the machined surface. Both the Sa and HAL values increase with higher voltage and duty cycle, while they decrease with rising frequency and electrode rotation speed. Consequently, the surface quality can be enhanced by lowering the voltage and duty cycle and by increasing the frequency and electrode rotation speed. Notably, short arc machining leads to a high-temperature oxidation reaction, primarily producing SiO2, which serves to prevent further oxidation of the material. However, the process also results in microscopic defects, such as fiber breakage and fiber pull-out. These findings offer both theoretical and experimental foundations for the future realization of high-efficiency and high-quality processing of 2.5D C/SiC composites via SEAM.

Experimental investigations on silicon carbide mixed electric discharge machining

Multi-Objective Optimization in Electrical Discharge Machining of 6061 Al/SiCp Using RSM and NSGA-II

Optimization of the Material Removal Rate and Electrode Wear Ratio in Electrical Discharge Machining of Reaction-bonded Silicon Carbide by Response Surface Methodology

A Machine Learning Perspective to the Investigation of Surface Integrity of Al/SiC/Gr Composite on EDM

Data-driven analysis in magnetic field-assisted electrical discharge machining of high-volume SiCp/Al

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Modelling and Optimization of Machining of SiC-CNT Conductive Ceramic Composite used for Micro and Nano Sensor by Electrical Discharge Machining

Multi-objective Optimization of Electric Discharge Machining of Al-SiCp Composite by Taguchi-PCA, Firefly and Cuckoo Search Algorithm

Experimental investigation and multi-objective optimization of eco-friendly near-dry electrical discharge machining of shape memory alloy using Cu/SiC/Gr composite electrode

Optimization of Electrical Discharge Machining Parameters for Enhanced Performance on Inconel 718 Using Cu-Ni-B4C Nanocomposite Electrodes and Advanced Modeling Techniques

Experimental investigation of magnetic-field-assisted electric discharge machining by silicon-based dielectric of Inconel 706 superalloy

Study of atomized discharge ablation-chemical composite machining of SiCp/Al

Study of ablation behavior on 2.5-dimensional C/SiC composites processed via short electric arc milling with various parameters

Multi-Response Optimization of Electrochemical Machining Parameters for Inconel 718 via RSM and MOGA-ANN

Modeling the machining parameters in end electric discharge milling of silicon carbide ceramic

Study on productivity and aerosol emissions of magnetic field-assisted EDM process of SiCp/Al composite with high volume fractions

Processing of silicon carbide particulate reinforced aluminum alloy composites using rotary electrochemical discharge machining

Predictive modeling of MRR, TWR, and SR in spark-EDM of Al-4.5Cu–SiC using ANN and GEP

Experimental Analysis of Ductile Cutting Regime in Face Milling of Sintered Silicon Carbide

Sustainable electric discharge machining using alumina-mixed deionized water as dielectric: Process modelling by artificial neural networks underpinning net-zero from industry

A review on conventional and nonconventional machining of SiC particle-reinforced aluminium matrix composites