Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The machinability of 2.5D C/SiC composites is severely limited by their inherent brittleness, inhomogeneity, and anisotropy. Conventional machining techniques are often associated with several drawbacks, including elevated costs, significant tool deterioration, and suboptimal efficiency. In contrast, short electric arc milling (SEAM) emerges as a promising innovation in the field of specialized machining, serving as a crucial technical approach for the effective processing of conductive materials that pose machining challenges. This work explores the surface quality law after short arc machining of 2.5D C/SiC composites under different process parameters and investigates etching damage incurred. To assess the influence of different parameters on the surface quality post-machining, two evaluation indices were established: surface roughness (Sa) and the thickness of the heat-affected layer (HAL). A one-factor test was set up to analyze the voltage and current waveforms, the electron microscopy images of the processed surface, Raman spectra, and the surface energy spectrum, using Sa, HAL, and the microscopic morphology as the detection indices. Moreover, the study demonstrates that the arc discharge energy and the discharge frequency exert considerable influences on the quality of the machined surface. Both the Sa and HAL values increase with higher voltage and duty cycle, while they decrease with rising frequency and electrode rotation speed. Consequently, the surface quality can be enhanced by lowering the voltage and duty cycle and by increasing the frequency and electrode rotation speed. Notably, short arc machining leads to a high-temperature oxidation reaction, primarily producing SiO2, which serves to prevent further oxidation of the material. However, the process also results in microscopic defects, such as fiber breakage and fiber pull-out. These findings offer both theoretical and experimental foundations for the future realization of high-efficiency and high-quality processing of 2.5D C/SiC composites via SEAM.

Modeling the machining parameters in end electric discharge milling of silicon carbide ceramic

Effect of machining parameters on the milling process of 2.5D C/SiC ceramic matrix composites

Influence of electrical resistivity and machining parameters on electrical discharge machining performance of engineering ceramics

Effect of short electric arc milling discharge machining on the processing performance of two-dimensional C/SiC composites

Experimental Analysis of Ductile Cutting Regime in Face Milling of Sintered Silicon Carbide

Experimental investigations on silicon carbide mixed electric discharge machining

Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology

Study of ablation behavior on 2.5-dimensional C/SiC composites processed via short electric arc milling with various parameters

Modelling and Optimization of Machining of SiC-CNT Conductive Ceramic Composite used for Micro and Nano Sensor by Electrical Discharge Machining

Optimization of the Material Removal Rate and Electrode Wear Ratio in Electrical Discharge Machining of Reaction-bonded Silicon Carbide by Response Surface Methodology

Optimization of Machining Parameters for Milling Zirconia Ceramics by Polycrystalline Diamond Tool

Processing of silicon carbide particulate reinforced aluminum alloy composites using rotary electrochemical discharge machining

Precision Grinding Technology of Silicon Carbide (SiC) Ceramics by Longitudinal Torsional Ultrasonic Vibrations

Material Removal Mechanism of SiC Ceramic by Porous Diamond Grinding Wheel Using Discrete Element Simulation

Analysis and Optimization of the Machining Characteristics of High-Volume Content SiCp/Al Composite in Wire Electrical Discharge Machining

Numerical simulation of the gap flow field for CEDMMG compound machining engineering ceramics

MACHINING PROCESSES OF SILICON CARBIDE : A REVIEW

Modeling and experiment of material removal rate for cutting single-crystal silicon by electrical discharge wire sawing

Research on ultrasonic vibration–assisted electrical discharge machining SiCp/Al composite

Investigation of the Thermophysical Simulation and Material Removal Mechanism of the High-Volume-Fraction SiCp/Al Composite in Wire Electrical Discharge Machining

Grinding Force Model and Experimental Study on Ultrasonic Assisted Spiral Grinding of Silicon Carbide Ceramic Materials